skip to main text

Aligning the Print Head

If printed ruled lines are misaligned or print results are otherwise unsatisfactory, adjust the print head position.

Note

  • When the ink has run out during printing the nozzle check pattern, the error message will appear on the LCD.

You need to prepare: a sheet of A4 or Letter-sized plain paper (including recycled paper)*

* Be sure to use paper that is white and clean on both sides.

  1. Make sure that the power is turned on.

  2. Load a sheet of A4 or Letter-sized plain paper in the cassette 1.

    After inserting the cassette into the printer, the paper information registration screen is displayed on the LCD. Select A4 or Letter for Size: and Plain paper for Type:, then press the OK button.

    Figure: LCD

    Important

    • The cassette 2 is not available for the print head alignment procedure. Be sure to load paper in the cassette 1.
  3. Extend the output tray extension, then open the paper output support.

  4. Press the Setup button, use the Left or Right button to select Maintenance, then press the OK button.

  5. Use the Left or Right button to select Head alignment, then press the OK button.

    Figure: LCD

    The print head alignment sheet will be printed and the print head position will be adjusted automatically.

    This takes about 3 to 4 minutes.

Note