Settings on a PictBridge Compliant Device
This section describes the PictBridge function of the machine. For the print settings on a PictBridge compliant device, refer to the instructions given in the device's instruction manual.
NoteIn the following description, names of setting items are given according to those used in Canon-brand PictBridge compliant devices. Setting item names may be different depending on the brand or model of your device.
Some setting items explained below may not be available on some devices. In this case, the settings made on the machine are applied. Also, when some items are set to Default on a PictBridge compliant device, the machine settings for these items are applied.
Depending on the PictBridge compliant device, you can print a photo onto the disc label of the printable disc.
The following settings can be used when printing from a PictBridge compliant device.
|
Paper size |
4" x 6"/ 10 x 15 cm, 5" x 7"*1, 8" x 10"/ 20 x 25 cm, A4, 8.5" x 11"(Letter) * Can be selected only on certain Canon-brand PictBridge compliant devices. (May not be selected depending on the device.) |
|
Paper type |
|
|
Layout |
Default (Selections based on the machine setting), Index, Bordered, Borderless, N-up (2, 4, 9, 16)*1, 20-up*2, 35-up*3 *1 Layout compatible with A4 or Letter-sized paper and Canon-brand sticker above. *2 With a Canon brand PictBridge compliant device, selecting items with "i" mark allows you to print shooting info (Exif Data) in list format (20-up) or on the margins of the specified data (1-up). (May not be available with some Canon-brand PictBridge compliant devices.) *3 Printed in 35 mm Film Style Layout (Contact Printing Layout). Available only with a Canon-brand PictBridge compliant device. (May not be available with some Canon-brand PictBridge compliant devices.) |
|
Print date & file no. |
Default (Off: No printing), Date, File No., Both, Off |
|
Image optimize |
Default (Selections based on the machine setting), On (Auto photo fix)*1, Off, Red-Eye*2 *1 The scene or person's face of a shot photo is recognized and the most suitable correction for each photo is made automatically. It makes a darkened face by backlight brighter to print. It also analyzes a scene such as scenery, night scene, person, etc. and corrects each scene with the most suitable color, brightness, or contrasts automatically to print. *2 Can be selected only on certain Canon-brand PictBridge compliant devices. (May not be selected depending on the device.) |
|
Trimming |
Default (Off: No trimming), On (follow the camera's setting), Off |
You can change the PictBridge print settings from the PictBridge print settings screen. Set the print settings to Default on the PictBridge compliant device when you want to print according to the settings on the machine.
This section describes the procedure to display the PictBridge print settings screen.
Make sure that the machine is turned on.
Press the MENU button.
The menu screen is displayed.
Select 
Setup, then press the OK button.
Select 
Device settings, then press the OK button.
Use the 
button to select PictBridge print settings, then press the OK button.
Check the message that is displayed, then press the OK button.
The PictBridge print settings screen is displayed.
For details on the setting items:
NoteIf you select Disc label print setting, the Set disc print area screen is displayed to change the disc label print setting.
Page top |
