You can specify the advanced settings of each receive mode.
This section describes the procedure to specify the advanced settings of the receive mode and the setting items.
Specify the advanced settings following the procedure below.
Make sure that the machine is turned on.
Press the FAX button.
The Fax standby screen is displayed.
Press the center Function button.
The Receive mode settings screen is displayed.
Use the 
button to select a receive mode, then press the right Function button.
Use the button to select a setting item, then press the OK button.
Use the button to specify the setting, then press the OK button.
Depending on the setting items, the related setting items are displayed after you specify the setting of the advanced settings and press the OK button. Use the button again to specify the setting, then press the OK button.
For details on advanced settings of each receive mode, see below.
Advanced setting in TEL priority mode
Advanced setting in FAX only mode
Advanced setting in Network switch
NoteRefer to Receiving Faxes for information on receiving faxes or the procedure for each receive mode.
DRPD is available only in the US and Canada.
Network switch may not be available depending on the country or region of purchase.
You can specify the following setting items.
Manual/auto switch
If you select ON, the machine automatically receives faxes after the external device rang a specified length of time.
You can specify the length of time until automatic reception is started.
User-friendly reception
If you select ON, the machine automatically switches from telephone calling to fax reception by detecting the fax signal (CNG signal) when you lift the handset of the telephone or the answering machine answers. When you have an answering machine connected to the machine, select ON to switch to fax reception automatically after the answering machine answers.
If you select OFF, the machine does not switch from telephone calling to fax reception automatically even if the machine detects the fax signal (CNG signal). Select OFF if you want the machine not to switch automatically during a call.
NoteIf you subscribe to Duplex Ringing service in Hong Kong, the number of times the external device rings specified with Incoming ring in FAX only mode is available in TEL priority mode.
If you want to specify the number of times the external device rings in TEL priority mode, select FAX only mode on the Receive mode settings screen, specify the number of times the external device rings with Incoming ring, then switch to TEL priority mode on the Receive mode settings screen.
If you subscribe to Duplex Ringing service in Hong Kong, we recommend that Manual/auto switch be set to OFF.
You can specify the following setting item.
Incoming ring
You can specify the number of times the external device rings when incoming.
You can specify the following setting items.
DRPD: FAX ring pattern
Sets the distinctive ring pattern of a call that the machine assumes is a fax call.
If you subscribe to a DRPD service, set the ring pattern to match the pattern assigned by your telephone company.
Incoming ring
You can specify the number of times the external device rings when incoming.
You can specify the following setting item.
Incoming ring
You can specify the number of times the external device rings when incoming.
Page top |
