Attaching to and Removing from the Printer

Attaching the Bluetooth Unit to the Printer

Attach the Bluetooth unit to the USB flash drive port of the printer in accordance with the following procedure.

Refer to Front View for the position of the USB flash drive port.

1. Make sure that the printer is turned on.

2. Insert the Bluetooth unit to the USB flash drive port of the printer.

   Detach the cap from the Bluetooth unit. Store the cap in a safe location.

   

   Note

   • When the Bluetooth unit is properly attached to the printer, the message is displayed on the LCD.

Removing the Bluetooth Unit from the Printer

Remove the Bluetooth unit from the USB flash drive port of the printer in accordance with the following procedure.

1. Remove the Bluetooth unit from the USB flash drive port of the printer.

   Important

   • Make sure that the lamp on the Bluetooth unit is neither lit nor flashing before you remove the Bluetooth unit.

   

   Important

   • Store the Bluetooth unit with the cap attached.