FA018M

Preventing Mistransmission of Faxes

This machine has two functions for preventing the mistransmission of faxes.

Sending Faxes after Dialing Twice (Fax Number Re-entry)

Set FAX no. re-entry to ON following the procedure below.

  1. Make sure that the machine is turned on.

    Confirming that the Power Is On

  2. Press the Setup button.

    The Setup menu screen is displayed.

  3. Use the LEFTRIGHT button to select Fax settings, then press the OK button.

  4. Use the LEFTRIGHT button to select Security control, then press the OK button.

  5. Use the LEFTRIGHT button to select FAX no. re-entry, then press the OK button.

  6. Use the LEFTRIGHT button to select ON, then press the OK button.

If you send a fax with this function, the following screen is displayed after entering the recipient's fax/telephone number using the Numeric buttons.

figure: LCD

Enter the recipient's fax/telephone number using the Numeric buttons again.

Note
  • If the number is not identical with the number entered first, the Fax standby screen is displayed.

Sending Faxes after Checking Information (Checking the Recipient's Information)

Set Check RX FAX info to ON following the procedure below.

Important
  1. Make sure that the machine is turned on.

    Confirming that the Power Is On

  2. Press the Setup button.

    The Setup menu screen is displayed.

  3. Use the LEFTRIGHT button to select Fax settings, then press the OK button.

  4. Use the LEFTRIGHT button to select Security control, then press the OK button.

  5. Use the LEFTRIGHT button to select Check RX FAX info, then press the OK button.

  6. Use the LEFTRIGHT button to select ON, then press the OK button.

    Important
    • Transmission will be canceled if the machine fails to receive the recipient's fax information or if the received information does not match the fax/telephone number.

Page top