skip to main text

Changing the Machine Settings Using the Operation Panel

This section describes the procedure to change the settings in the Device settings screen, taking the steps to specify Prevent paper abrasion as an example.

  1. Make sure that the machine is turned on.

  2. Flick the HOME screen, then tap Setup.

    Using the Operation Panel

  3. Tap Device settings.

    The Device settings screen is displayed.

  4. Tap the setting item to adjust.

    figure: Touch screen

    The setting screen for the selected item is displayed.

  5. Tap the setting item.

    figure: Touch screen
  6. Tap the setting to specify.

    figure: Touch screen

You can select the setting menus below.

FAX settings

Print settings

LAN settings

Device user settings

Language selection

Firmware update

Cassette settings

Administrator password setting

Operation restrictions

Reset setting

Important

  • Depending on the setting item, authentication by the administrator password is required.

    About the Machine Administration

    If you do not know the administrator password, ask the administrator of the machine you are using.

Note

  • You can use the machine considering the environment, such as setting 2-sided printing as default or enabling the machine to turn on/off automatically.

    About ECO settings

  • You can reduce the operating noise when printing at night.

    About Quiet setting