Auto maintenance settings

This item is displayed when you select Printer settings on the Home screen.

Important

• The administrator password is required to change settings if it is enabled for changing settings using the operation panel.

• Auto nozzle check

  Enables/Disables automatic nozzle checking. You can also select the page interval to perform automatic nozzle checking.

• Nozzle check error display

  Enables/Disables displaying the nozzle check error.

• System Cleaning frequency

  Specifies the frequency of automatic system cleaning.

  Note

  • To maintain print quality, we recommend you select Short if you use the printer at a higher elevation.

• Print pattern after new head

  Selects whether you print an adjustment pattern after replacing the Print head.

• Ink ejection status check

  Sets whether to monitor print head ejection status, and to automatically fix issues or to display a warning.

  • Auto fix

    When a change in the print head ejection status is detected, the head position is automatically fixed. If you want to obtain more precise adjustment results, we recommend setting Display warning and performing Print Head Alignment when the warning is displayed.

    • Automatic Adjustment to Straighten Lines and Align Colors

  • Display warning

    Displays a notification message on the touch screen when a change in the print head ejection status is detected.

  • OFF

    Disables automatic detection.

  Important

  • Depending on the paper feeding method, Cutting mode settings, etc., automatic detection may not be performed.