skip to main Item

imagePROGRAF TZ-32000
imagePROGRAF TZ-5320

Plain Paper (High Density)

  • Previous
  • Next
Item Description
Category Plain Papers
Operation Panel Plain Paper (High density)
Printer Driver Plain Paper (High Density)
Type of Black Ink MBK
Execute Color Calibration No
Factory Default PRESET
Display Region JP,CK,OC,EMEA,AM,AS
Approximate Basis Weight (g/㎡) 64
Approximate Thickness (mm) 0.09

Important

  • Ink will take longer to dry because this setting prints at high density.

    Note the following:

    • Allow enough time for drying.

      If the ink has not dried sufficiently, ink may stick to surfaces or the printed surface may get scratched.

    • There may be scratching at the leading or trailing edges of the printing surface, or paper jams may occur.

      To prevent this from occurring, we recommend that you create a margin of at least 180 mm at the leading edge and 75 mm at the trailing edge of the image.

    • We recommend that you attach a basket.

      If you print without attaching a basket, ink may stain the floor.Refer to "Using the Basket on the Front of the Printer" for details.

Note

  • These are general-purpose paper settings.