skip to main Item

imagePROGRAF TZ-32000
imagePROGRAF TZ-5320

Highest Density Coated Paper

  • Previous
  • Next
Item Description
Category Coated Papers
Operation Panel HD Coated Paper
Printer Driver Highest Density Coated Paper
ICC Profile (Displayed Name) Canon T-Series Highest Density Coated Paper
ICC Profile (File Name) CN_T-Series_HighestDensityCoatedPaper.icc
Type of Black Ink MBK,BK
Execute Color Calibration No
Factory Default PRESET
Display Region JP,CK,OC,EMEA,AM,AS
Approximate Basis Weight (g/㎡) 170
Approximate Thickness (mm) 0.22
Number of Borderless Printing Sides Two-sided Borderless
Borderless Printing Available
Automatic Cutting Eject Cut
Top output availability Not possible
Default Output Set From Panel Front Output
For Front Output: Leading Edge Cut Length (normal humidity) 80 mm
For Front Output: Leading Edge Cut Length (low/high humidity) 80 mm
For Front Output: Minimum Print Cut Length（normal humidity） 200 mm
For Front Output: Minimum Print Cut Length（low/high humidity） 200 mm
For Top Output: Leading Edge Cut Length 205 mm
For Top Output: Minimum Print Cut Length 205 mm

Important

  • Ink will take longer to dry because this setting prints at high density.

    Note the following:

    • Ink drying time may vary depending on the paper used.

      Change [Drying Time] settings if necessary.

      If the ink has not dried sufficiently, ink may stick to surfaces or the printed surface may get scratched.Change [Drying Time] settings if necessary.Refer to "Specifying the Ink Drying Time for Rolls" for details.

    • The printer's [Cutting mode] is set to [Eject cut] by default.

      Use [Eject cut] when printing.If the printer's [Cutting mode] setting is changed to [Automatic cut], paper may be cut before the ink has dried sufficiently.Refer to "Specifying the Cutting Method for Rolls" for details.

    • There may be scratching at the leading or trailing edges of the printing surface, or paper jams may occur.

      To prevent this from occurring, we recommend that you create a margin of at least 180 mm at the leading edge and 75 mm at the trailing edge of the image.

    • We recommend that you attach a basket.

      If you print without attaching a basket, ink may stain the floor.Refer to "Using the Basket on the Front of the Printer" for details.

Note

  • These are general-purpose paper settings.
  • Borderless Printing
    Depending on the paper used, borderless printing may not be available.