Front
- A: Top Delivery Tray
- B: Transport Unit Cover
- Open this cover to remove jammed paper from inside the printer.
- C: Front Output Guide
- Printed documents set to front output are output from here.
- D: Roll Cover 1
- Open this cover to load rolls in the upper feed slot.
- E: Roll Cover 2
- Open this cover to load rolls in the lower feed slot.
- F: Accessory Drawer
- Store printer manuals, assembly tools, and spare ink tanks.
- The basket for documents output from the front is also stored in the drawer.
- G: Roll Paper Indicator
- Displays the status of roll paper loaded on each roll.
- H: Maintenance Cover
- Open this cover to replace the maintenance cartridge and operate the release lever.
- I: USB Flash Drive Port
- Insert a USB flash drive to this port.
- J: Operation Panel
- Use this screen to operate the printer and check the printer status.
- K: Ink Tank Cover
- Open this cover to replace the ink tank.
Roll Paper Indicator
- A: Feed Lamp (blue)
-
-
Lit
Roll paper is fed into the printer. When paper feeding to the printer is completed, the lamp of the fed roll lights up.
-
Off
Roll paper is not fed into the printer. Removing the roll paper or releasing the release lever turns this lamp off.
-
- B: Paper Level Lamp (green)
-
The number of lights indicates the amount of roll paper remaining.
-
Lit (level 4)
312 feet (95 m) or more remaining.
-
Lit (level 3)
Between 141 feet (43 m) and 312 feet (95 m) remaining.
-
Lit (level 2)
Between 39 feet (12 m) and 141 feet (43 m) remaining.
-
Lit (level 1)
Less than 39 feet (12 m) remaining.
Note-
The actual amount remaining may differ from the displayed amount.
-
- C: Alarm Lamp (orange)
-
Indicates that a remaining amount warning has occurred, there is no remaining roll paper, or the roll holder is not set.
-
Lit
If a warning occurs in standby the lamp lights up.
-
Flashing
If a warning occurs during printing the lamp flashes.
-
