imagePROGRAF TX-4100
Heavyweight Coated Paper A
| Item | Description |
|---|---|
| Category | Coated Papers |
| Operation Panel | HW. Coated Paper A |
| Printer Driver | Heavyweight Coated Paper A |
| Type of Black Ink | MBK,BK |
| Factory Default | PRESET |
| Display Region | JP,CK,OC,EMEA,AM,AS |
| Approximate Basis Weight (g/㎡) | 170 |
| Approximate Thickness (mm) | 0.22 |
| Number of Borderless Printing Sides | Four-sided Borderless |
| Borderless Printing | Available |
| Automatic Cutting | Yes |
| Leading Edge Cut Length (normal humidity) | 30 mm |
| Leading Edge Cut Length (low/high humidity) | 30 mm |
| Minimum Print Cut Length（normal humidity） | 30 mm |
| Minimum Print Cut Length（low/high humidity） | 30 mm |
Important
-
Ink drying time may vary depending on the paper used.
Change [Drying Time] settings if necessary.
Refer to "Specifying the Ink Drying Time for Rolls" for details.
Note
- These are general-purpose paper settings.
-
Setting [Print Priority] to [Image] results in a higher ink density than when [Heavyweight Coated Paper] is selected.
Print results may vary depending on the paper used. -
Borderless Printing
Depending on the paper used, borderless printing may not be available.
