Printing Network Settings
Use the operation panel to print the printer's current network settings.
Important
- The network settings printout contains important information about your network. Handle it with care.
-
Load plain paper.
If you use sheets, prepare at least 11 sheets (A4 or Letter-sized).
-
Select Printer settings on HOME screen.
-
Select LAN settings.
-
Select Print details.
-
Select Yes on displayed screen.
-
Select Yes or No on displayed screen.
The printer starts printing network settings information.
Note
- You can also print the printer's network settings. Select Printer settings > Test print > Print LAN details > Yes > Yes.
The printed network settings information is as follows: (Some setting values are not displayed depending on the printer settings.)
Item |
Description |
Setting |
---|---|---|
LAN Setting |
Basic setting information |
- |
Basic Info |
IPv4 setting information (Wired LAN) |
- |
LAN Interface Mode |
Current interface |
Wired LAN/Wireless LAN(Infra)/Wireless LAN(AP)/Wireless(Direct connection)/Disabled |
Link Active |
Operation status |
Active/Inactive |
Gigabit Ethernet Settings |
Communication speed and communication method when using Gigabit Ethernet |
Auto/10M half duplex/10M full duplex/100M half duplex/100M full duplex/1G full duplex |
IP Address |
IPv4 IP address |
XXX.XXX.XXX.XXX |
Gateway Address |
IPv4 default gateway |
XXX.XXX.XXX.XXX |
Subnet Mask |
IPv4 subnet mask |
XXX.XXX.XXX.XXX |
IP Mode |
Acquiring method of IPv4 IP address |
Auto IP/DHCP/Manual |
Use DNS Auto Mode |
Acquiring DNS server automatically |
On/Off |
Primary DNS Server Address |
Primary DNS server address |
XXX.XXX.XXX.XXX |
Secondary DNS Server Address |
Secondary DNS server address |
XXX.XXX.XXX.XXX |
Control Filtering |
SNMP filtering setting information |
- |
Use IP Filtering |
Operation status of IP filtering |
On/Off |
IP Filtering Select |
IP filtering method |
Disabled/Enabled |
IP Filtering Permission Address |
IP filtering permission address |
- |
Start Address 1 |
Start address 1 |
XXX.XXX.XXX.XXX |
End Address 1 |
End address 1 |
XXX.XXX.XXX.XXX |
Use Single On 1 |
Use single on 1 |
On/Off |
Start Address 2 |
Start address 2 |
XXX.XXX.XXX.XXX |
End Address 2 |
End address 2 |
XXX.XXX.XXX.XXX |
Use Single On 2 |
Use single on 2 |
On/Off |
Start Address 3 |
Start address 3 |
XXX.XXX.XXX.XXX |
End Address 3 |
End address 3 |
XXX.XXX.XXX.XXX |
Use Single On 3 |
Use single on 3 |
On/Off |
Start Address 4 |
Start address 4 |
XXX.XXX.XXX.XXX |
End Address 4 |
End address 4 |
XXX.XXX.XXX.XXX |
Use Single On 4 |
Use single on 4 |
On/Off |
Start Address 5 |
Start address 5 |
XXX.XXX.XXX.XXX |
End Address 5 |
End address 5 |
XXX.XXX.XXX.XXX |
Use Single On 5 |
Use single on 5 |
On/Off |
IP Filtering Prohibit Address |
IP filtering prohibit address |
- |
Start Address 1 |
Start address 1 |
XXX.XXX.XXX.XXX |
End Address 1 |
End address 1 |
XXX.XXX.XXX.XXX |
Use Single On 1 |
Use single on 1 |
On/Off |
Start Address 2 |
Start address 2 |
XXX.XXX.XXX.XXX |
End Address 2 |
End address 2 |
XXX.XXX.XXX.XXX |
Use Single On 2 |
Use single on 2 |
On/Off |
Start Address 3 |
Start address 3 |
XXX.XXX.XXX.XXX |
End Address 3 |
End address 3 |
XXX.XXX.XXX.XXX |
Use Single On 3 |
Use single on 3 |
On/Off |
Start Address 4 |
Start address 4 |
XXX.XXX.XXX.XXX |
End Address 4 |
End address 4 |
XXX.XXX.XXX.XXX |
Use Single On 4 |
Use single on 4 |
On/Off |
LAN Setting |
Basic setting information |
- |
Basic Info |
IPv4 setting information (Wired LAN) |
- |
Control Filtering |
SNMP filtering setting information |
- |
IP Filtering Prohibit Address |
IP filtering prohibit address |
- |
Start Address 5 |
Start address 5 |
XXX.XXX.XXX.XXX |
End Address 5 |
End address 5 |
XXX.XXX.XXX.XXX |
Use Single On 5 |
Use single on 5 |
On/Off |
Print Filtering |
Print filtering setting information |
- |
Use IP Filtering |
Operation status of IP filtering |
On/Off |
IP Filtering Select |
IP filtering method |
Disabled/Enabled |
IP Filtering Permission Address |
IP filtering permission address |
- |
Start Address 1 |
Start address 1 |
XXX.XXX.XXX.XXX |
End Address 1 |
End address 1 |
XXX.XXX.XXX.XXX |
Use Single On 1 |
Use single on 1 |
On/Off |
Start Address 2 |
Start address 2 |
XXX.XXX.XXX.XXX |
End Address 2 |
End address 2 |
XXX.XXX.XXX.XXX |
Use Single On 2 |
Use single on 2 |
On/Off |
Start Address 3 |
Start address 3 |
XXX.XXX.XXX.XXX |
End Address 3 |
End address 3 |
XXX.XXX.XXX.XXX |
Use Single On 3 |
Use single on 3 |
On/Off |
Start Address 4 |
Start address 4 |
XXX.XXX.XXX.XXX |
End Address 4 |
End address 4 |
XXX.XXX.XXX.XXX |
Use Single On 4 |
Use single on 4 |
On/Off |
Start Address 5 |
Start address 5 |
XXX.XXX.XXX.XXX |
End Address 5 |
End address 5 |
XXX.XXX.XXX.XXX |
Use Single On 5 |
Use single on 5 |
On/Off |
IP Filtering Prohibit Address |
IP filtering prohibit address |
- |
Start Address 1 |
Start address 1 |
XXX.XXX.XXX.XXX |
End Address 1 |
End address 1 |
XXX.XXX.XXX.XXX |
Use Single On 1 |
Use single on 1 |
On/Off |
Start Address 2 |
Start address 2 |
XXX.XXX.XXX.XXX |
End Address 2 |
End address 2 |
XXX.XXX.XXX.XXX |
Use Single On 2 |
Use single on 2 |
On/Off |
Start Address 3 |
Start address 3 |
XXX.XXX.XXX.XXX |
End Address 3 |
End address 3 |
XXX.XXX.XXX.XXX |
Use Single On 3 |
Use single on 3 |
On/Off |
Start Address 4 |
Start address 4 |
XXX.XXX.XXX.XXX |
End Address 4 |
End address 4 |
XXX.XXX.XXX.XXX |
Use Single On 4 |
Use single on 4 |
On/Off |
Start Address 5 |
Start address 5 |
XXX.XXX.XXX.XXX |
End Address 5 |
End address 5 |
XXX.XXX.XXX.XXX |
Use Single On 5 |
Use single on 5 |
On/Off |
LAN Setting |
Basic setting information |
- |
IPv6 Info |
IPv6 setting information (Wired LAN) |
- |
Link Local Address |
Link local address |
- |
IP Address |
IPv6 IP address |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
Prefix Length |
Link local address prefix length |
XXX (0 to 128) |
Use Manual Mode |
Operation status of IPv6 manual address |
On/Off |
Manual Address |
Manual address |
- |
IP Address |
IPv6 IP address |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
Prefix Length |
Prefix length |
XXX (0 to 128) |
Use Stateful Address Mode |
Operation status of stateful address mode |
On/Off |
Stateful Address |
Stateful address |
- |
IP Address |
IPv6 IP address |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
Prefix Length |
Prefix length |
XXX (0 to 128) |
Stateless Address |
Stateless address |
- |
IP Address 1 |
IP address 1 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
Prefix Length 1 |
Prefix length 1 |
XXX (0 to 128) |
IP Address 2 |
IP address 2 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
Prefix Length 2 |
Prefix length 2 |
XXX (0 to 128) |
IP Address 3 |
IP address 3 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
Prefix Length 3 |
Prefix length 3 |
XXX (0 to 128) |
IP Address 4 |
IP address 4 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
Prefix Length 4 |
Prefix length 4 |
XXX (0 to 128) |
Gateway Address |
Gateway address |
- |
IP Address 1 |
IP address 1 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
Prefix Length 1 |
Prefix length 1 |
XXX (0 to 128) |
IP Address 2 |
IP address 2 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
Prefix Length 2 |
Prefix length 2 |
XXX (0 to 128) |
IP Address 3 |
IP address 3 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
Prefix Length 3 |
Prefix length 3 |
XXX (0 to 128) |
IP Address 4 |
IP address 4 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
Prefix Length 4 |
Prefix length 4 |
XXX (0 to 128) |
Use DNS Auto Mode |
Acquiring DNS server automatically |
On/Off |
Primary DNS Server Address |
Primary DNS server address |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
Secondary DNS Server Address |
Secondary DNS server address |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
Control Filtering |
SNMP filtering setting information |
- |
Use IP Filtering |
Operation status of IP filtering |
On/Off |
IP Filtering Select |
IP filtering method |
Disabled/Enabled |
IPv6 Filtering Permission Info |
IPv6 filtering permission information |
- |
IP Filtering Start Address 1 |
IP filtering start address 1 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
IP Filtering End Address 1 |
IP filtering end address 1 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
Use Single On 1 |
Use single on 1 |
On/Off |
LAN Setting |
Basic setting information |
- |
IPv6 Info |
IPv6 setting information (Wired LAN) |
- |
Control Filtering |
SNMP filtering setting information |
- |
IP Filtering Start Address 2 |
IP filtering start address 2 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
IP Filtering End Address 2 |
IP filtering end address 2 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
Use Single On 2 |
Use single on 2 |
On/Off |
IP Filtering Start Address 3 |
IP filtering start address 3 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
IP Filtering End Address 3 |
IP filtering end address 3 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
Use Single On 3 |
Use single on 3 |
On/Off |
IP Filtering Start Address 4 |
IP filtering start address 4 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
IP Filtering End Address 4 |
IP filtering end address 4 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
Use Single On 4 |
Use single on 4 |
On/Off |
IP Filtering Start Address 5 |
IP filtering start address 5 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
IP Filtering End Address 5 |
IP filtering end address 5 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
Use Single On 5 |
Use single on 5 |
On/Off |
IPv6 Filtering Prohibit Info |
IPv6 Filtering prohibit information |
- |
IP Filtering Start Address 1 |
IP filtering start address 1 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
IP Filtering End Address 1 |
IP filtering end address 1 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
Use Single On 1 |
Use single on 1 |
On/Off |
IP Filtering Start Address 2 |
IP filtering start address 2 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
IP Filtering End Address 2 |
IP filtering end address 2 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
Use Single On 2 |
Use single on 2 |
On/Off |
IP Filtering Start Address 3 |
IP filtering start address 3 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
IP Filtering End Address 3 |
IP filtering end address 3 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
Use Single On 3 |
Use single on 3 |
On/Off |
IP Filtering Start Address 4 |
IP filtering start address 4 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
IP Filtering End Address 4 |
IP filtering end address 4 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
Use Single On 4 |
Use single on 4 |
On/Off |
IP Filtering Start Address 5 |
IP filtering start address 5 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
IP Filtering End Address 5 |
IP filtering end address 5 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
Use Single On 5 |
Use single on 5 |
On/Off |
Print Filtering |
Print filtering setting information |
- |
Use IP Filtering |
Operation status of IP filtering |
On/Off |
IP Filtering Select |
IP filtering method |
Disabled/Enabled |
IP Filtering Permission Info |
IP filtering permission information |
- |
IP Filtering Start Address 1 |
IP filtering start address 1 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
IP Filtering End Address 1 |
IP filtering end address 1 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
Use Single On 1 |
Use single on 1 |
On/Off |
IP Filtering Start Address 2 |
IP filtering start address 2 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
IP Filtering End Address 2 |
IP filtering end address 2 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
Use Single On 2 |
Use single on 2 |
On/Off |
LAN Setting |
Basic setting information |
- |
IPv6 Info |
IPv6 setting information (Wired LAN) |
- |
Print Filtering |
Print filtering setting information |
- |
IP Filtering Start Address 3 |
IP filtering start address 3 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
IP Filtering End Address 3 |
IP filtering end address 3 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
Use Single On 3 |
Use single on 3 |
On/Off |
IP Filtering Start Address 4 |
IP filtering start address 4 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
IP Filtering End Address 4 |
IP filtering end address 4 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
Use Single On 4 |
Use single on 4 |
On/Off |
IP Filtering Start Address 5 |
IP filtering start address 5 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
IP Filtering End Address 5 |
IP filtering end address 5 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
Use Single On 5 |
Use single on 5 |
On/Off |
IPv6 Filtering Prohibit Info |
IPv6 Filtering prohibit information |
- |
IP Filtering Start Address 1 |
IP filtering start address 1 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
IP Filtering End Address 1 |
IP filtering end address 1 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
Use Single On 1 |
Use single on 1 |
On/Off |
IP Filtering Start Address 2 |
IP filtering start address 2 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
IP Filtering End Address 2 |
IP filtering end address 2 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
Use Single On 2 |
Use single on 2 |
On/Off |
IP Filtering Start Address 3 |
IP filtering start address 3 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
IP Filtering End Address 3 |
IP filtering end address 3 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
Use Single On 3 |
Use single on 3 |
On/Off |
IP Filtering Start Address 4 |
IP filtering start address 4 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
IP Filtering End Address 4 |
IP filtering end address 4 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
Use Single On 4 |
Use single on 4 |
On/Off |
IP Filtering Start Address 5 |
IP filtering start address 5 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
IP Filtering End Address 5 |
IP filtering end address 5 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
Use Single On 5 |
Use single on 5 |
On/Off |
MAC Info |
MAC address setting information (Wired/Wi-Fi) |
- |
MAC Address(Wired) |
MAC address (Wired LAN) |
XX:XX:XX:XX:XX:XX |
MAC Address(Wireless) |
MAC address (Wi-Fi) |
XX:XX:XX:XX:XX:XX |
Use MAC Address Filtering |
Operation status of MAC address filtering |
On/Off |
MAC Filtering Select |
MAC address filtering method |
Disabled/Enabled |
MAC Filtering Permission Info |
MAC filtering permission information |
- |
MAC Address 1 |
MAC address 1 |
XX:XX:XX:XX:XX:XX |
MAC Address 2 |
MAC address 2 |
XX:XX:XX:XX:XX:XX |
MAC Address 3 |
MAC address 3 |
XX:XX:XX:XX:XX:XX |
MAC Address 4 |
MAC address 4 |
XX:XX:XX:XX:XX:XX |
MAC Address 5 |
MAC address 5 |
XX:XX:XX:XX:XX:XX |
LAN Setting |
Basic setting information |
- |
MAC Info |
MAC address setting information (Wired/Wi-Fi) |
- |
MAC Filtering Prohibit Info |
MAC filtering prohibit information |
- |
MAC Address 1 |
MAC address 1 |
XX:XX:XX:XX:XX:XX |
MAC Address 2 |
MAC address 2 |
XX:XX:XX:XX:XX:XX |
MAC Address 3 |
MAC address 3 |
XX:XX:XX:XX:XX:XX |
MAC Address 4 |
MAC address 4 |
XX:XX:XX:XX:XX:XX |
MAC Address 5 |
MAC address 5 |
XX:XX:XX:XX:XX:XX |
Proxy Setting |
Proxy server setting information |
- |
Use Proxy |
Use proxy server |
On/Off |
Proxy Server Address |
Proxy server address |
XXXXXXXXXXXXXXXX (up to 128 characters) |
Proxy Port Number |
Proxy port specification |
1 to 65535 |
Use User Authority Mode |
Use user authority mode |
On/Off |
Proxy Server User Name |
Proxy server user name |
XXXXXXXXXXXXXXXX (up to 64 characters) |
Wireless LAN Setting |
Wi-Fi setting information |
- |
Channel |
Channel (infrastructure) |
XXX (0 to 255) |
SSID |
SSID |
Wi-Fi (infrastructure) SSID (up to 32 characters) |
Security Type |
Security type for Wi-Fi (infrastructure) |
Disabled/WEP 64bit/WEP 128bit/WPA PSK TKIP/WPA PSK AES/WPA2 PSK TKIP/WPA2 PSK AES/MIXED |
WEP1 |
WEP key 1 for Wi-Fi (infrastructure) |
XXXXXXXX (up to 32 characters) |
WEP2 |
WEP key 2 for Wi-Fi (infrastructure) |
XXXXXXXX (up to 32 characters) |
WEP3 |
WEP key 3 for Wi-Fi (infrastructure) |
XXXXXXXX (up to 32 characters) |
WEP4 |
WEP key 4 for Wi-Fi (infrastructure) |
XXXXXXXX (up to 32 characters) |
WEP Certificate |
WEP certificate for Wi-Fi (infrastructure) |
Open/Shared/Auto |
WEP Format |
WEP format for Wi-Fi (infrastructure) |
Hex/String |
Direct Connection Setting |
Wireless direct setting information |
- |
Device Name |
Wireless direct device name |
Wireless direct device name (up to 32 characters) |
Channel |
Channel (Wireless direct) |
XXX (0 to 255) |
SSID |
SSID |
Wireless direct network (SSID)(up to 32 characters) |
Security Type |
Security type for Wi-Fi (Wireless direct) |
Disabled/WPA2 PSK TKIP/WPA2 PSK AES |
WSD Setting |
WSD setting information |
- |
Use WSD |
Use WSD |
On/Off |
WSD Timeout |
Timeout |
1/5/10/15/20 [min] |
Use WSD Rx Optimization |
Use WSD reception optimization |
On/Off |
Protocol Setting |
Protocol setting information |
- |
Printer Name |
Printer name |
XXXXXXXX (up to 16 characters) |
Use LPR |
Use LPR |
On/Off |
Use Wired DRX |
Discontinuous reception (Wired LAN) |
On/Off |
Use Wireless DRX |
Discontinuous reception (Wi-Fi) |
On/Off |
Use RAW |
Use RAW |
On/Off |
Use LLMNR |
Use LLMNR |
On/Off |
Use Spanning Tree |
Use spanning tree |
On/Off |
Use Dedicated Port |
Dedicated port setting |
On/Off |
SNMP Setting |
SNMP setting information |
- |
Use SNMPv1 |
Use SNMPv1 |
On/Off |
Use SNMPv3 |
Use SNMPv3 |
On/Off |
SNMP Community Name1 |
SNMPv1 community name 1 |
XXXXXXXX (up to 32 characters) |
SNMP Community Name2 |
SNMPv1 community name 2 |
XXXXXXXX (up to 32 characters) |
SNMP Extra Access Authority |
SNMPv1 extra access authority |
Disable/Read Only/Read Write |
SNMP Access Authority1 |
SNMPv1 community1/2 access authority |
Disable/Read Only/Read Write |
SNMP Access Authority2 |
SNMPv1 community1/2 access authority |
Disable/Read Only/Read Write |
SNMPv3 Setting |
SNMPv3 setting information |
- |
User1 |
User 1 |
- |
User Name |
User name |
XXXXXXXX (up to 32 characters) |
Use SNMPv3 |
Use SNMPv3 |
On/Off |
MIB Access Restriction |
MIB access restriction |
Disable/Read Only/Read Write |
Security Setting |
Security setting |
No Auth No Priv/Auth No Priv/Auto Priv |
Authority Algorithm |
Authority algorithm |
Null/MD5/SHA1 |
Encryption Algorithm |
Encryption algorithm |
Null/AES/DES |
User2 |
User 2 |
- |
User Name |
User name |
XXXXXXXX (up to 32 characters) |
Use SNMPv3 |
Use SNMPv3 |
On/Off |
MIB Access Restriction |
MIB access restriction |
Disable/Read Only/Read Write |
Security Setting |
Security setting |
No Auth No Priv/Auth No Priv/Auto Priv |
Authority Algorithm |
Authority algorithm |
Null/MD5/SHA1 |
Encryption Algorithm |
Encryption algorithm |
Null/AES/DES |
User3 |
User 3 |
- |
User Name |
User name |
XXXXXXXX (up to 32 characters) |
Use SNMPv3 |
Use SNMPv3 |
On/Off |
MIB Access Restriction |
MIB access restriction |
Disable/Read Only/Read Write |
Security Setting |
Security setting |
No Auth No Priv/Auth No Priv/Auto Priv |
Authority Algorithm |
Authority algorithm |
Null/MD5/SHA1 |
Encryption Algorithm |
Encryption algorithm |
Null/AES/DES |
User4 |
User 4 |
- |
User Name |
User name |
XXXXXXXX (up to 32 characters) |
Use SNMPv3 |
Use SNMPv3 |
On/Off |
MIB Access Restriction |
MIB access restriction |
Disable/Read Only/Read Write |
Security Setting |
Security setting |
No Auth No Priv/Auth No Priv/Auto Priv |
Authority Algorithm |
Authority algorithm |
Null/MD5/SHA1 |
Encryption Algorithm |
Encryption algorithm |
Null/AES/DES |
User5 |
User 5 |
- |
User Name |
User name |
XXXXXXXX (up to 32 characters) |
Use SNMPv3 |
Use SNMPv3 |
On/Off |
MIB Access Restriction |
MIB access restriction |
Disable/Read Only/Read Write |
Security Setting |
Security setting |
No Auth No Priv/Auth No Priv/Auto Priv |
Authority Algorithm |
Authority algorithm |
Null/MD5/SHA1 |
Encryption Algorithm |
Encryption algorithm |
Null/AES/DES |
Dynamic DNS Setting |
Dynamic DNS setting |
- |
IPv4 |
IPv4 |
- |
Use Dynamic DNS |
Operation status of Dynamic DNS |
On/Off |
Host Name |
Host name |
XXXXXXXX (up to 64 characters) |
Domain Name |
Domain name |
XXXXXXXX (up to 254 characters) |
IPv6 |
IPv6 |
- |
Use Manual Address |
DNS dynamic setting of manual address |
On/Off |
Use Stateless Address |
DNS dynamic setting of stateless address |
On/Off |
Use Stateful Address |
DNS dynamic setting of stateful address |
On/Off |
Use Name As IPv4 |
Use same host name/domain name as that used for IPv4 |
On/Off |
Host Name |
Host name |
XXXXXXXX (up to 64 characters) |
Domain Name |
Domain name |
XXXXXXXX (up to 254 characters) |
SNTP Setting |
SNTP setting information |
- |
Use SNTP |
Use SNTP |
On/Off |
SNTP Polling Interval |
SNTP polling interval |
1 to 48 [hrs] |
SNTP Server Name |
SNTP server name |
XXXXXXXX (up to 256 characters) |
FTP Setting |
FTP setting information |
- |
Use FTP |
Use FTP |
On/Off |
Use FTP Authority |
Use FTP authority |
On/Off |
FTP User Name |
FTP user name |
XXXXXXXX (up to 33 characters) |
Bonjour Setting |
Bonjour setting information |
- |
Use Bonjour |
Use Bonjour |
On/Off |
Bonjour Service Name |
Bonjour service name |
Bonjour service name (Up to 49 alphanumeric characters) |
DHCP option settings |
DHCP option settings |
- |
IPv4 |
IPv4 |
- |
Acquire host name |
Acquire host name |
On/Off |
DNS dynamic update |
DNS dynamic update |
On/Off |
Acquire Domain Name |
Acquire Domain Name |
On/Off |
IPv6 |
IPv6 |
- |
Acquire host name |
Acquire host name |
On/Off |
DNS dynamic update |
DNS dynamic update |
On/Off |
Acquire Domain Name |
Acquire Domain Name |
On/Off |
802.1X Setting |
802.1X setting information |
- |
Authority Type |
Enable/disable 802.1X and authority type |
Do not use/EAP-TLS/EAP-TTLS/PEAP |
EAP TTLS Type |
Internal authority type for EAP-TTLS |
MSCHAPv2/PAP |
Weak Encryption Restriction |
Weak encryption restriction |
Do not restrict/Restrict |
Weak Certificate Restriction |
Weak certificate restriction |
Do not restrict/Restrict |
Login Name |
Login name |
XXXXXXXX (up to 97 characters) |
User Name |
User name |
XXXXXXXX (up to 97 characters) |
Server Name |
Server name |
XXXXXXXX (up to 43 characters) |
Verify Authentication Server Name |
Verify Authentication Server Name |
On/Off |
Verify Authentication Server Certificate |
Verify Authentication Server Certificate |
On/Off |
IPsec Setting |
IPsec setting information |
- |
Use IPsec |
Use IPsec |
On/Off |
Phase2 Protocol |
IPsec phase2 protocol |
AH/ESP/AH & ESP |
IPP Setting |
IPP confirmation setting |
- |
Enable/disable IPP |
Enable/disable IPP |
Enable/Disable |
Secure print |
Secure print |
Enable/Disable |
Use IPP Authority |
Use IPP authority |
On/Off |
IPP User Setting |
IPP confirmation user setting |
- |
User1 |
User 1 |
- |
User Name |
User name |
XXXXXXXX (up to 32 characters) |
User2 |
User 2 |
- |
User Name |
User name |
XXXXXXXX (up to 32 characters) |
User3 |
User 3 |
- |
User Name |
User name |
XXXXXXXX (up to 32 characters) |
User4 |
User 4 |
- |
User Name |
User name |
XXXXXXXX (up to 32 characters) |
User5 |
User 5 |
- |
User Name |
User name |
XXXXXXXX (up to 32 characters) |
User6 |
User 6 |
- |
User Name |
User name |
XXXXXXXX (up to 32 characters) |
User7 |
User 7 |
- |
User Name |
User name |
XXXXXXXX (up to 32 characters) |
User8 |
User 8 |
- |
User Name |
User name |
XXXXXXXX (up to 32 characters) |
User9 |
User 9 |
- |
User Name |
User name |
XXXXXXXX (up to 32 characters) |
User10 |
User 10 |
- |
User Name |
User name |
XXXXXXXX (up to 32 characters) |
Email Setting |
E-mail setting information |
- |
Retry Count |
E-mail retry count |
0 to 5 |
Retry Interval |
E-mail retry interval |
1 to 60 (min) |
Use Email Notification |
Use E-mail notification |
On/Off |
Use SSL |
Use SSL |
On/Off |
Use SSL Cert No Check |
Use SSL certification |
On/Off |
Use Mailbox Delete |
Use mailbox delete |
On/Off |
SMTP Server Address |
SMTP server address |
XXXXXXXX (up to 256 characters) |
SMTP Server Port No |
SMTP server port number |
0 to 65535 |
SMTP State |
SMTP state |
Invalid/Authorized/POP before SMTP |
From Address |
From address |
XXXXXXXX (up to 128 characters) |
To Address 1 |
To address 1 |
XXXXXXXX (up to 128 characters) |
Reply Address 1 |
Reply address 1 |
XXXXXXXX (up to 128 characters) |
Notice Conditions 1 |
Notice conditions 1 |
- |
Job End |
Job end |
On/Off |
Error Occurred |
Error occurred |
On/Off |
Warning Occurred |
Warning occurred |
On/Off |
Signature 1 |
Signature 1 |
XXXXXXXX (up to 128 characters) |
To Address 2 |
To address 2 |
XXXXXXXX (up to 128 characters) |
Reply Address 2 |
Reply address 2 |
XXXXXXXX (up to 128 characters) |
Notice Conditions 2 |
Notice conditions 2 |
- |
Job End |
Job end |
On/Off |
Error Occurred |
Error occurred |
On/Off |
Warning Occurred |
Warning occurred |
On/Off |
Signature 2 |
Signature 2 |
XXXXXXXX (up to 128 characters) |
RUI Setting |
Remote UI setting information |
- |
Use RUI |
Use Remote UI |
On/Off |
("XX" represents alphanumeric characters.)