skip to main text

Specifications

Important

  • The following values may vary depending on the operating environment.

Printer

Power supply 100-240 V AC (50/60 Hz)
Power consumption

When printing: 107 W max.

In Sleep mode: 3.6 W max. *1

Standby (all ports connected): 3.6 W max.

When power is off: 0.3 W max. *1 *2

*1 Wired LAN connection

*2 The printer uses a trace amount of power even when turned off. To stop all power consumption, turn off the printer and unplug the power cord.

Operating environment

Temperature: 59 to 86 °F (15 to 30 °C)

Humidity: 10 to 80 % RH (with no condensation)

Dimensions (W x D x H)

Main unit only:

Approx. 62.8 x 28.9 x 24.8 inches (1593 x 734 x 628 mm)

Main unit and Stand (when basket is not used):

Approx. 62.8 x 30.2 x 46 inches (1593 x 766 x 1168 mm)

Main unit and Stand (when using basket: Basket Position 1) *1:

Approx. 62.8 x 38.8 x 46 inches (1593 x 984 x 1168 mm)

Main unit and Stand (when using basket: Basket Position 2/4/5) *1:

Approx. 62.8 x 48.2 x 46 inches (1593 x 1222 x 1168 mm)

Main unit and Stand (when using basket: Basket Position 3) *1:

Approx. 62.8 x 56.5 x 46 inches (1593 x 1434 x 1168 mm)

Main unit and Stacker (with Stacker Position Closed) *2:

Approx. 62.8 x 44.2 x 46 inches (1593 x 1122 x 1168 mm)

Main unit and Stacker (with Stacker Position Open) *2:

Approx. 62.8 x 46.8 x 46 inches (1593 x 1188 x 1168 mm)

*1 For details on the Basket Position, see Example Basket Configurations.

*2 For details on the Stacker Position, see Example Stacker Configurations.

Weight

Main unit only (does not include print head and ink tanks):

Approx. 211 lb (96 kg)

Stand and Basket: Approx. 40 lb (18 kg)

Roll unit: Approx. 44 lb (20 kg)

Stacker: Approx. 31 lb (14 kg)

Space for installation (W x D x H)

Main unit and Stand (when basket is not used):

Approx. 78.5 x 57.8 x 61.5 inches (1993 x 1466 x 1560 mm)

Main unit and Stand (when basket is used):

Approx. 78.5 x 66.3 x 61.5 inches (1993 x 1684 x 1560 mm)

Main unit and Stacker:

Approx. 78.5 x 74.4 x 61.5 inches (1993 x 1888 x 1560 mm)

Printing performance

Print method Bubblejet
Maximum resolution

2400 dpi (horizontally) * x 1200 dpi (vertically)

* Prints with a minimum 1/2400 inch dot pitch between ink droplets.

Print head PF-06
Number of nozzles MBK: 5120 nozzles, others: each 2560 nozzles

Memory and hard disk

Memory 128 GB (2GB physical memory)
Hard disk capacity

500 GB (encryption)

Personal mail boxes (Permanent storage area): 180 GB

Print job storage capacity

Common Box: 100 jobs

Personal Boxes: 100 jobs

Interface

You can use both USB and LAN at the same time.

You cannot use wireless LAN and wired LAN at the same time.

USB

Hi-Speed USB *

* To use Hi-Speed USB, your computer must support Hi-Speed USB. Additionally, the Hi-Speed USB interface is completely backward compatible with USB 1.1, so the printer can be connected even if the computer interface is USB 1.1.

USB memory USB flash drive
LAN

Wired LAN: IEEE802.3ab (1000BASE-T) / IEEE802.3u (100BASE-TX) / IEEE802.3 (10BASE-T)

Wireless LAN: IEEE802.11n / IEEE802.11g / IEEE802.11b *

* A connection can be established by configuring Standard setup, WPS (Wi-Fi Protected Setup), WCN (Windows Connect Now), Easy wireless connect.

Network Specifications

Communication protocol SNMP (Canon-MIB compatible), HTTP, TCP/IP (IPv4/IPv6), FTP
Wired LAN specifications

Compliance standards: IEEE802.3ab (1000BASE-T) / IEEE802.3u (100BASE-TX) / IEEE802.3 (10BASE-T)

Transmission speed: 10 Mbps / 100 Mbps / 1000 Mbps (automatically selected)

Wireless LAN specifications

Compliance standards: IEEE802.11n / IEEE802.11g / IEEE802.11b

Frequency range: 2.4 GHz

Channels: 1-11 or 1-13 *

* Varies by country and region.

Effective range: Indoors 164 feet/50 m *

* Varies according to environmental conditions.

Security:

WEP (64/128 bits)

WPA-PSK (TKIP/AES)

WPA2-PSK (TKIP/AES)

Setup:

WPS (push button method/PIN code method)

WCN (WCN-NET)

Easy wireless connect

Other: Admin password

Operating Conditions

If operating conditions of the operating system are high, follow those.

Windows

Compatible Operating System (Standard supplied printer driver)

32-bit version:

Windows 10

Windows 8.1

Windows 7

Use the latest Service Pack available.

64-bit version:

Windows 10

Windows 8.1

Windows 7

Windows Server 2008 R2

Windows Server 2012, Windows Server 2012 R2

Windows Server 2016

Use the latest Service Pack available.

Windows RT (Windows 8 ARM architecture) not supported.

Recommended operating environment *

CPU: Pentium 4 or later, or Athlon 64 or later processor

Memory: 1 GB or more

Free hard disk space: 20 GB or more

* Depending on the application software and data being used, the printer may not output correctly even with the above environmental conditions.

macOS

Compatible Operating System (Standard supplied printer driver) OS X 10.10.5 - OS X 10.11, macOS 10.12
Recommended operating environment *

CPU: Intel multi-core processor or later

Memory: 2 GB or more

Free hard disk space: 20 GB or more

* Depending on the application software and data being used, the printer may not output correctly even with the above environmental conditions.

  • An Internet connection is required to use the Online Manual.
  • To install the software while using Windows, you must have a CD-ROM drive or a network connection.
  • To install the software while using macOS, you must have a network connection.

Ink

For information on the ink the printer supports, see Ink Tanks.

Paper

For details on the compatible media types, see Paper Information List.

Paper width For details on the paper widths supported by the printer, see Paper Sizes.
Minimum paper length 8.00 inches (203.2 mm)
Maximum printable length

Rolls: 59 feet (18 m) *

* Varies depending on the operating system or application.

Sheets: 5.2 feet (1.6 m)

Thickness

Rolls: 3-31 mil (0.07-0.8 mm)

Sheets: 3-31 mil (0.07-0.8 mm)

Roll maximum outer diameter 6.7 inches (170 mm) or shorter
Supported paper core inner diameter 2 inches/3 inches (50.8 mm/76.2 mm)
Print area For details about Print Area, see Print Area.