LAN settings
Wireless LAN
-
WLAN active/inactive
Enables/disables wireless LAN.
-
Wireless LAN setup
Selects the setup method for wireless LAN connection.
-
Easy wireless connect
Select if you specify the settings of the access point information to the printer directly from a device (e.g. smartphone, or tablet) without operating the wireless router. Follow the on-screen instructions of the connecting device for the setup procedure.
-
Manual connect
Select when you perform settings for wireless LAN manually using the operation panel of the printer.
-
WPS (Push button method)
Select when you perform settings for wireless LAN using a wireless router supporting a Wi-Fi Protected Setup (WPS) push button method. Follow the on-screen instructions during setup.
-
Other setup
-
Advanced setup
Select when you perform settings for wireless LAN manually. You can specify multiple WEP keys.
-
WPS (PIN code method)
Select when you perform settings for wireless LAN using a wireless router supporting a Wi-Fi Protected Setup (WPS) PIN code method. Follow the on-screen instructions during setup.
-
-
-
WLAN setting list
The list of wireless LAN settings of this printer is displayed on the touch screen.
Select Print details and then Yes to print the list.
Important
- The network settings printout contains important information about your network. Handle it with care.
The following setting items are displayed. (Some setting items are not displayed depending on the printer settings.)
Items
Setting
SSID
XXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXX (up to 32 characters)Wireless LAN security
Inactive/WEP(64bit)/WEP(128bit)/WPA-PSK(TKIP)/WPA-PSK(AES)/WPA2-PSK(TKIP)/WPA2-PSK(AES)
Signal strength (%)
XXX
IPv4 address
XXX. XXX. XXX. XXX (12 characters)
IPv4 subnet mask
XXX. XXX. XXX. XXX (12 characters)
IPv4 default gateway
XXX. XXX. XXX. XXX (12 characters)
IPv6 address
XXXX: XXXX: XXXX: XXXX:
XXXX: XXXX: XXXX: XXXX (32 characters)MAC address of wireless LAN
XX:XX:XX:XX:XX:XX (12 characters)
Printer name
XXXXXXXXXXXXXXX (up to 15 characters)
Bonjour service name
XXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX (up to 52 characters)Root cert. thumbprint (SHA-1)
XXXXXXXX XXXXXXXX XXXXXXXX
XXXXXXXX XXXXXXXXRoot cert. thumbprint (SHA-256)
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX("XX" represents alphanumeric characters.)
Wireless Direct
-
Wireless Direct active/inactive
Enables/disables Wireless Direct.
-
Update SSID/password
Selecting Yes updates the identifier (SSID) and password for Wireless Direct.
-
Change device name
Changes the printer's name displayed on a Wi-Fi Direct compatible device.
-
Connection request confirmation
Selecting Yes displays the confirmation screen when a Wi-Fi Direct compatible device is connecting the printer.
-
Wireless Direct setting list
The list of Wireless Direct settings of this printer is displayed on the touch screen.
Select Print details and then Yes to print the list.
Important
- The network settings printout contains important information about your network. Handle it with care.
The following setting items are displayed. (Some setting items are not displayed depending on the printer settings.)
Items
Setting
SSID
DIRECT-XXXX-TS6000series
Password
XXXXXXXXXX (10 characters)
Wireless LAN security
WPA2-PSK(AES)
IPv4 address
XXX. XXX. XXX. XXX (12 characters)
IPv4 subnet mask
XXX. XXX. XXX. XXX (12 characters)
IPv4 default gateway
XXX. XXX. XXX. XXX (12 characters)
IPv6 address
XXXX: XXXX: XXXX: XXXX:
XXXX: XXXX: XXXX: XXXX (32 characters)MAC address of wireless LAN
XX:XX:XX:XX:XX:XX (12 characters)
Printer name
XXXXXXXXXXXXXXX (up to 15 characters)
Bonjour service name
XXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX (up to 52 characters)Wireless Direct device name
XXXXXX-XXXXXXseries
No. of devices connected now
XX/XX
Root cert. thumbprint (SHA-1)
XXXXXXXX XXXXXXXX XXXXXXXX
XXXXXXXX XXXXXXXXRoot cert. thumbprint (SHA-256)
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX("XX" represents alphanumeric characters.)
Common settings
-
Set printer name
Specifies the printer name. You can use up to 15 characters for the name.
Note
- You cannot use the same printer name as that already used for other LAN connected devices.
- You cannot use a hyphen for the initial or last character of the printer name.
-
TCP/IP settings
Performs IPv4 or IPv6 setting.
-
WSD setting
Setting items when you use WSD (one of the network protocols supported in Windows 8.1, Windows 8, Windows 7, and Windows Vista).
-
Enable/disable WSD
Selects whether WSD is enabled or disabled.
Note
- When this setting is enabled, the printer icon is displayed on the Network Explorer in Windows 8.1, Windows 8, Windows 7, and Windows Vista.
-
Optimize inbound WSD
Selecting Enable allows you to receive the WSD printing data faster.
-
WSD scan from this device
Selecting Enable allows you to transfer the scanned data to the computer using WSD.
-
Timeout setting
Specifies the timeout length.
-
-
Bonjour settings
Setting items for LAN using Bonjour for Mac OS.
-
Enable/disable Bonjour
Selecting Enable allows you to use Bonjour to perform the network settings.
-
Service name
Specifies the Bonjour service name. You can use up to 48 characters for the name.
Note
- You cannot use the same service name as that already used for other LAN connected devices.
-
-
LPR protocol setting
Enables/disables the LPR setting.
-
RAW protocol
Enables/disables RAW printing.
-
LLMNR
Enables/disables LLMNR (Link-Local Multicast Name Resolution). Selecting Active allows the printer to detect printer's IP address from the printer name without a DNS server.
-
PictBridge communication
Setting items for printing from a PictBridge (Wireless LAN) compliant device.
-
Enable/disable communication
Selecting Enable allows you to print from a PictBridge (Wireless LAN) compliant device.
-
Timeout setting
Specifies the timeout length.
-
-
IPsec settings
Selecting Active allows you to specify the IPsec security.