Updating Printer Firmware
![](common/a.gif)
Important
- Make sure the printer is connected to Internet before updating printer firmware.
Follow the procedure below.
Updating Printer Firmware from Operation Panel
-
Make sure the printer is turned on and display HOME screen.
If the HOME screen is not displayed, press the HOME button.
-
Select
(Setup) icon.
The setup menu screen appears.
-
Select
Settings.
-
Select
Device settings.
-
Select Firmware update.
-
Select Install update.
-
Check displayed message and select Yes.
-
Check displayed message and select Start update.
Update starts.
Finishing update turns off the printer and it turns on again.
-
Check displayed message and select OK.
Updating Printer Firmware from Remote UI
-
Select Firmware update.
-
Select Install update.
-
Check displayed message and select Update.
Update starts and returns to the menu screen when update is completed.