Other printer settings

• Date/time settings

  Sets the current date and time.

  • Setting Sender Information

  Important

  • If a power failure occurs or you unplug the power cord, the date/time settings will be reset.

• Date display format

  Changes the display format of dates when printed.

  Note

  • When ON is selected for Print date on the print settings screen in printing from a memory card, the date is printed in the date display format you selected.

    • Setting Items for Photo Printing Using Operation Panel

• Daylight saving time setting

  Enables/disables the summer time setting. If you select ON, you can select additional sub-settings. This setting may not be available depending on the country or region of purchase.

  • Start date/time

    Sets the date and time that summer time starts.

    Month: Specify the month.

    Week: Specify the week.

    DOW: Specify the day of the week.

    The screen to set the shift time to start summer time will be displayed after specifying the items above and selecting OK.

    After specifying the shift time and selecting OK, you can specify the end date/time.

  • End date/time

    Sets the date and time that summer time ends.

    Month: Specify the month.

    Week: Specify the week.

    DOW: Specify the day of the week.

    The screen to set the shift time to end summer time will be displayed after specifying the items above and selecting OK.

    Specify the shift time and select OK.

• Sound control

  Selects the volume.

  • Keypad volume

    Selects the beep volume when tapping the touch screen or the buttons on the operation panel.

  • Alarm volume

    Selects the alarm volume.

  • Line monitor volume

    Selects the line monitor volume.

  • Offhook alarm

    Selects the alarm volume when the phone receiver is not put on the hook properly.

• Energy saving settings

  Allows you to turn on/off the printer automatically to save electricity.

  • Auto power off

    Specifies the length of time to turn off the printer automatically when no operation is made or no printing data is sent to the printer.

  • Auto power on

    Selecting ON enables the printer to turn on automatically when a scanning command from a computer or printing data is sent to the printer.

  Note

  • You can also select this setting by selecting (Setup) on the HOME screen, selecting ECO, and then selecting Energy saving settings.

    • ECO settings

• Original removal reminder

  Selects whether the printer will display the reminder screen in case you forget to remove the original from the platen after scanning.

  Important

  • Depending on the type of original or the state of the document cover, forgetting to remove the original may not be detected.

• Wi-Fi pairing settings

  In order to connect Canon PRINT Inkjet/SELPHY, multiple configurations will be performed.

  • Enable/disable pairing

    Set the printer's Wi-Fi pairing function to enable or disable.

  • Allow/block additional pairing

    On another function permit or prohibit Canon PRINT Inkjet/SELPHY pairing.

  • Delete paired devices

    Cancel all Canon PRINT Inkjet/SELPHY pairing.

• Keyboard layout

  Select the keyboard layout from the following three types.

  • QWERTY

  • QWERTZ

  • AZERTY