skip to main text

Other printer settings

  • Date/time settings

    Sets the current date and time.

    Important

    • If a power failure occurs or you unplug the power cord, the date/time settings will be reset.

  • Date display format

    Changes the display format of dates when printed.

  • Daylight saving time setting

    Enables/disables the summer time setting. If you select ON, you can select additional sub-settings. This setting may not be available depending on the country or region of purchase.

    • Start date/time

      Sets the date and time that summer time starts.

      Month: Specify the month.

      Week: Specify the week.

      DOW: Specify the day of the week.

      The screen to set the shift time to start summer time will be displayed after specifying the items above and selecting OK.

      After specifying the shift time and selecting OK, you can specify the end date/time.

    • End date/time

      Sets the date and time that summer time ends.

      Month: Specify the month.

      Week: Specify the week.

      DOW: Specify the day of the week.

      The screen to set the shift time to end summer time will be displayed after specifying the items above and selecting OK.

      Specify the shift time and select OK.

  • Sound control

    Selects the volume.

    • Keypad volume

      Selects the beep volume when tapping the touch screen or the buttons on the operation panel.

    • Alarm volume

      Selects the alarm volume.

    • Line monitor volume

      Selects the line monitor volume.

    • Offhook alarm

      Selects the alarm volume when the phone receiver is not put on the hook properly.

  • Energy saving settings

    Allows you to turn on/off the printer automatically to save electricity.

    • Auto power off

      Specifies the length of time to turn off the printer automatically when no operation is made or no printing data is sent to the printer.

    • Auto power on

      Selecting ON enables the printer to turn on automatically when a scanning command from a computer or printing data is sent to the printer.

    Note

    • You can also select this setting by selecting (Setup) on the HOME screen, selecting ECO, and then selecting Energy saving settings.

  • Original removal reminder

    Selects whether the printer will display the reminder screen in case you forget to remove the original from the platen after scanning.

    Important

    • Depending on the type of original or the state of the document cover, forgetting to remove the original may not be detected.

  • Wi-Fi pairing settings

    In order to connect Canon PRINT Inkjet/SELPHY, multiple configurations will be performed.

    • Enable/disable pairing

      Set the printer's Wi-Fi pairing function to enable or disable.

    • Allow/block additional pairing

      On another function permit or prohibit Canon PRINT Inkjet/SELPHY pairing.

    • Delete paired devices

      Cancel all Canon PRINT Inkjet/SELPHY pairing.

  • Keyboard layout

    Select the keyboard layout from the following three types.

    • QWERTY

    • QWERTZ

    • AZERTY