LCD and Operation Panel
The Copy standby screen appears when the printer is turned on.
![](screens/ug_l_cmpt110.jpg)
When the COPY button, SCAN button, FAX button, or Setup button is pressed, the display switches to copy mode, scan mode, fax mode, or setup menu screen.
Copy mode
![](screens/ug_l_cmpt120.jpg)
Scan mode
![](screens/ug_l_sc_02.jpg)
Fax mode
![](screens/ug_l_se_01.jpg)
Setup
![](screens/ug_l_cmpt140.jpg)
When the Menu/Wireless connect button is pressed in the Copy standby screen, Scan standby screen or Fax standby screen, the menu screen appears.
Copy menu
![](screens/ug_l_cmpt150.jpg)
Scan menu
![](screens/ug_l_sc_01.jpg)
Fax menu
![](screens/ug_l_cmpt160.jpg)
In a menu or settings screen, use the
button to select an item or option, and then press the OK button to proceed with the procedure.
Note
-
For details on how to change settings, refer to Changing Settings from Operation Panel.
Network Status Indication
Wi-Fi setting and the network status indicate by the icon.
![](screens/ug_l_cmpt910.jpg)
If the icon appears on the LCD when the SCAN button or Setup button is pressed, it indicates that Wi-Fi is enabled and the printer is connected to the wireless router.
Depending on the signal state, the icon will change.
![]() |
Signal strength: 81 % or more You can use the printer over Wi-Fi without any problems. |
![]() |
Signal strength: 51 % or more The problem such as the printer cannot print may occur according to the network status. We recommend placing the printer near the wireless router. |
![]() |
Signal strength: 50 % or less The problem such as the printer cannot print may occur. Place the printer near the wireless router. |
![]() |
Wi-Fi is enabled but the printer is not connected to the wireless router. |
Note
-
When Wi-Fi is disabled, the
icon is not displayed.