Inside View
- A: Ink lamps
-
Lights or flashes to indicate the ink tank status.
Lights: The ink tank is correctly installed.
Flashing slowly (at around 3-second intervals): The ink is running low. Prepare a new ink tank.
Flashing fast (at around 1-second intervals): Ink has run out.
Off: The ink tank is not installed properly or the function for detecting the remaining ink level is disabled.
- B: Print Head Holder
- Install the print head here.
- C: Print Head Lock Lever
- Locks the print head into place.
Important
-
Do not pull up the print head lock lever after installing the print head.
-
If you pull up the print head lock lever after installing the print head, push both tabs in left to right order until each clicks into place.
Note
-
For details on replacing an ink tank, see Replacing Ink Tanks.