skip to main text

Updating Printer Firmware

Important

  • Make sure the printer is connected to Internet before updating printer firmware.
  • You cannot update printer firmware when using the battery. Use the AC adapter.

Follow the procedure below.

Updating Printer Firmware from Operation Panel

  1. Make sure the printer is turned on.

  2. Select (Setup) on HOME screen and press OK button.

  3. Select Device settings and press OK button.

  4. Select Firmware update and press OK button.

  5. Select Install update and press OK button.

  6. Check displayed message and press OK button.

  7. Check displayed message, select Yes and then press OK button.

  8. Check displayed message and press OK button.

    Update starts.

    Finishing update turns off the printer and it turns on again.

  9. Check displayed message and press OK button.

Updating Printer Firmware from Remote UI

  1. Display printer status on web browser.

  2. Select Firmware update.

  3. Select Install update.

  4. Check displayed message and select Update.

    Update starts and returns to the menu screen when update is completed.