skip to main text

Paper Information Registration Screen Does Not Appear When Loading Paper

If the paper information registration screen does not appear when you load paper and you cannot specify the paper size, check the following.

  1. Check1 Check that Check paper replacement is set to Enable.

    From (Setup) on the HOME screen, select Feed settings > Check paper replacement. If Check paper replacement is set to Disable, the paper information registration screen does not appear when paper is loaded. Set to Enable.

  2. Check2 Check that dark colored paper is not loaded.

    If dark colored paper, or paper that has already been printed on is loaded, the paper may not be recognized. Select Feed settings > Rear tray paper settings and change the paper information directly.

  3. Check3 Check that paper is loaded correctly.

    If the paper is not loaded correctly, the paper may not be recognized. Load the paper correctly.