skip to main text

Detecting Roll Paper was Replaced While the Power was Off

When you turn the printer on, it can confirm whether the roll paper was replaced while the power was off.

Set Auto Feed at Power ON to ON to detect the position of the roll paper's leading edge when the power is turned on. If the position of the roll paper's leading edge is over 1 mm since the last time the power was turned off, the printer determines that the roll paper has been replaced, and then starts feeding paper automatically to detect the paper width and the barcode for the management of unused roll paper.

Note

  • Setting Auto Feed at Power ON to ON causes the operations that can be done after turning on the power to take longer since the printer must detect the leading edge of the roll paper.

  1. Select Paper-Related Settings on Home screen.

  2. Select Auto Feed at Power ON.

  3. Select ON.