Advanced (Paper settings)
Select the paper setting display area and select Paper settings to display this menu.
| Advanced | ||||
| Roll length (change default) | ||||
| Paper thickness (head height) | ||||
| Auto / -4 (Low) / -3 / -2 / 0 (Standard) / +1 / +2 / +3 (High) | ||||
| Skew detection accuracy | ||||
| Standard / Loose / OFF | ||||
| Cutting mode | ||||
| Automatic cut / Eject cut / User cut | ||||
| Cut speed | ||||
| Auto / Fast / Standard / Slow | ||||
| Trim edge first | ||||
| Auto / Off / On(Preset Length) / On(Input Length) / Manual | ||||
| Cut-dust reduction | ||||
| ON / OFF | ||||
| Transport unit vacuum strength | ||||
| Auto / Strong / Medium-strong / Standard / Medium-weak / Weak | ||||
| Roll paper tension (printing) | ||||
| High / Standard / Low | ||||
| Roll paper tension (feeding) | ||||
| High / Standard / Low | ||||
| Pause between scans | ||||
| Ink drying wait time | ||||
| OFF / 0.5 seconds / 1 second / 3 seconds / 5 seconds / 7 seconds / 9 seconds | ||||
| Ink drying target area | ||||
| Overall / Leading edge | ||||
| Pause between pages | ||||
| OFF / 30 seconds / 1 minute / 3 minutes / 5 minutes / 10 minutes / 30 minutes / 60 minutes | ||||
| Leading edge margin (roll) | ||||
| 3mm / 20mm | ||||
| Leading edge margin (sheet) | ||||
| 3mm / 20mm | ||||
| Extension for borderless printing | ||||
| Paper with recommended width | ||||
| Large / Standard / Small | ||||
| Paper of sufficient width | ||||
| Select extension amount | ||||
| 1 (min) / 2 / 3 / 4 / 5 / 6 / 7 / 8 (max) | ||||
| Sample of extension amounts | ||||
| 1 (min) / 2 / 3 / 4 / 5 / 6 / 7 / 8 (max) | ||||
| Detect paper width | ||||
| Enable / Disable | ||||
| Paper core outer diameter | ||||
| Paper thickness | ||||
| Reset detection priority data | ||||
| Reset paper settings by paper | ||||
