Specifications
Important
- The following values may vary depending on the operating environment.
Printer
| Power supply | 100-240 V AC (50/60 Hz) |
|---|---|
| Power consumption |
When printing: 69 W max. *1 In Sleep mode: 3.6 W max. *1 Standby (all ports connected): 3.6 W max. When power is off: 0.3 W max. *2 *1 Wired LAN connection *2 The printer uses a trace amount of power even when turned off. To stop all power consumption, turn off the printer and unplug the power cord. |
| Operating environment |
Temperature: 59 to 86 °F (15 to 30 °C) Humidity: 10 to 80 % RH (with no condensation) |
| Dimensions (W x D x H) |
Printer and Stand SD-32 (Extended position A): Approx. 50.8 x 35 x 41.8 inches (1289 x 887 x 1060 mm) Printer and Stand SD-32 (Extended position B): Approx. 50.8 x 43.4 x 41.8 inches (1289 x 1100 x 1060 mm) For Extended position, see Using the Basket. Actual basket shipped with printer device may vary according to region. |
| Weight |
Printer and Stand SD-32 (without print head and ink tanks): Approx. 132 lb (60 kg) |
| Space for installation (W x D x H) |
Printer and Stand SD-32: Approx. 66.5 x 67 x 53.6 inches (1689 x 1700 x 1360 mm) |
Printing performance
| Print method | Bubblejet |
|---|---|
| Maximum resolution |
2400 dpi (horizontally) * x 1200 dpi (vertically) * Prints with a minimum 1/2400 inch dot pitch between ink droplets. |
| Print head | PF-06 |
| Number of nozzles | MBK: 5120 nozzles, others: each 2560 nozzles |
Memory
| Memory | 2 GB |
|---|
Interface
You can use both USB and LAN at the same time.
You cannot use Wi-Fi and wired LAN at the same time.
| USB |
Hi-Speed USB * * To use Hi-Speed USB, your computer must support Hi-Speed USB. Additionally, the Hi-Speed USB interface is completely backward compatible with USB 1.1, so the printer can be connected even if the computer interface is USB 1.1. |
|---|---|
| LAN |
Wired LAN: IEEE802.3ab (1000BASE-T) / IEEE802.3u (100BASE-TX) / IEEE802.3 (10BASE-T) Wi-Fi: IEEE802.11n / IEEE802.11g / IEEE802.11b |
Network Specifications
| Communication protocol | SNMP (Canon-MIB compatible), HTTP, TCP/IP (IPv4/IPv6), FTP |
|---|---|
| Wired LAN specifications |
Compliance standards: IEEE802.3ab (1000BASE-T) / IEEE802.3u (100BASE-TX) / IEEE802.3 (10BASE-T) Transmission speed: 10 Mbps / 100 Mbps / 1000 Mbps (automatically selected) |
| Wi-Fi specifications |
Compliance standards: IEEE802.11n / IEEE802.11g / IEEE802.11b Frequency range: 2.4 GHz Channels: 1-11 or 1-13 * * Varies by country and region. Effective range: Indoors 164 feet/50 m * * Varies according to environmental conditions. Security: WEP (64/128 bits) WPA-PSK (TKIP/AES) WPA2-PSK (TKIP/AES) Setup: WPS (push button method/PIN code method) WCN (WCN-NET) Easy wireless connect Other: Admin password |
Operating Conditions
If operating conditions of the operating system are high, follow those.
Windows
| Compatible Operating System (Standard supplied printer driver) |
32-bit version: Windows 10 Windows 8.1 Windows 7 Use the latest Service Pack available. 64-bit version: Windows 10 Windows 8.1 Windows 7 Windows Server 2008 R2 Windows Server 2012, Windows Server 2012 R2 Windows Server 2016 Use the latest Service Pack available. |
|---|---|
| Recommended operating environment * |
CPU: Pentium 4 or later, or Athlon 64 or later processor Memory: 1 GB or more Free hard disk space: 20 GB or more |
* Depending on the application software and data being used, the printer may not output correctly even with the above environmental conditions.
macOS
| Compatible Operating System (Standard supplied printer driver) | OS X 10.10.5 - OS X 10.11, macOS 10.12 - macOS 10.13 |
|---|---|
| Recommended operating environment * |
CPU: Intel multi-core processor or later Memory: 2 GB or more Free hard disk space: 20 GB or more |
* Depending on the application software and data being used, the printer may not output correctly even with the above environmental conditions.
- An Internet connection is required to use the Online Manual.
- To install the software while using Windows, you must have a CD-ROM drive or a network connection.
- To install the software while using macOS, you must have a network connection.
Ink
For information on the ink the printer supports, see Ink Tanks.
Paper
For details on the compatible media types, see Paper Information List.
| Paper width | For details on the paper widths supported by the printer, see Paper Sizes. |
|---|---|
| Minimum paper length |
Rolls: 8.00 inches (203.2 mm) Sheets: 11.00 inches (279.4 mm) |
| Maximum printable length |
Rolls: 59 feet (18 m) * * Varies depending on the operating system or application. Sheets: 5.2 feet (1.6 m) |
| Thickness |
Rolls: 3-31 mil (0.07-0.8 mm) Sheets: 3-31 mil (0.07-0.8 mm) |
| Roll maximum outer diameter | 5.9 inches (150 mm) or shorter |
| Supported paper core inner diameter | 2.00 inches/3.00 inches (50.8 mm/76.2 mm) |
| Print area | For details about Print Area, see Print Area. |
