Remove Jammed Paper (Paper Feed Slot)

Follow these steps to remove any scraps left in the paper feed slot after you clear jammed sheets or roll paper.

1. Positioning your hands as shown, open the cut sheet feed cover.

   

2. Open the roll paper feed cover by unlocking it with the lever in the position shown in the figure.

   

3. Fold an A4 sheet lengthwise four times, insert it through the gap of the paper feed slot, and scrape the jammed paper to the paper feed slot side.

   

4. Remove scrap when it is pushed out onto the paper feed slot.

5. If any scraps remain inside paper feed slot, repeat steps 3 and 4.

6. Holding it at the positions indicated, close the roll paper feed cover and cut sheet feed cover.