Advanced (Paper settings)

Tap the paper information area and tap Paper settings to display this menu.

Advanced
	Roll length (change default)
	Head height
		Auto / High / Medium-high / Standard / Medium-low / Low / Super low
	Skew detection accuracy
		Standard / Loose / OFF
	Cutting mode
		Automatic cut / Eject cut / User cut
	Cut speed
		Fast / Standard / Slow
	Trim edge first
		Auto / Off / On(Preset Length) / On(Input Length) / Manual
	Cut-dust reduction
		ON / OFF
	Transport unit vacuum strength
		Auto / Strong / Medium-strong / Standard / Medium-weak / Weak
	Guide arm retention pressure
		High / Low
	Roll paper tension (printing)
		High / Standard / Low
	Roll paper tension (feeding)
		High / Standard / Low
	Roll paper tension (winding up)
		High / Standard / Low
	Pause between scans
		Ink drying wait time
			OFF / 0.5 seconds / 1 second / 3 seconds / 5 seconds / 7 seconds / 9 seconds
		Ink drying target area
			Overall / Leading edge
	Pause between pages
		OFF / 30 seconds / 1 minute / 3 minutes / 5 minutes / 10 minutes / 30 minutes / 60 minutes
	Pause on last page take-up
		OFF / 5 minutes / 10 minutes / 30 minutes / 60 minutes / 120 minutes / 240 minutes / 480 minutes / 960 minutes
	Pause timing priority
		Between pages / On last page
	Leading edge margin (roll)
		3mm / 20mm
	Leading edge margin (sheet)
		3mm / 20mm
	Extension for borderless printing
		Paper with recommended width
			Large / Standard / Small
		Paper with adequate width
			Select extension amount
				1 (min) / 2 / 3 / 4 / 5 / 6 / 7 / 8 (max)
			Sample of extension amounts
				1 (min) / 2 / 3 / 4 / 5 / 6 / 7 / 8 (max)
	Detect paper width
		Enable / Disable
	Paper tube outer diameter
	Paper thickness
	Auto-rewind roll paper at sleep
		Active / Inactive
	Reset detection priority data
		Yes / No
	Reset paper settings by paper
		Yes / No