skip to main text

Menu Structure

The * on the right side of an item indicates the default value.

Values may vary depending on your model and firmware version.

  • Ink information

    This menu is displayed by tapping Ink icon.

    Current estimated ink levels
    Replace
    Order ink now
  • Paper settings

    This menu is displayed by tapping paper information area.

    Roll paper 1
    Replace paper
    Feed/cut
    Remove paper
    Paper settings
    Width / Type / Advanced / Register
    Roll paper 2
    Replace paper
    Feed/cut
    Remove paper
    Roll unit use setting
    Paper settings
    Width / Type / Advanced / Register
    Take-up mode
    Roll unit use setting
    Auto feed to take-up position
    Skip errors during take-up
    ON / OFF
    Wind up after cutting
    Enable / Disable
    Paper retention setting
    Release / Retain
    Use in take-up mode
    Use / Do not use
    Manual
    Replace paper
    Remove paper
    Paper settings
    Page size / Type / Advanced / Register
  • Maintenance

    Nozzle Check
    Print head cleaning
    Cleaning
    All colors / Pattern 1 / Pattern 2 / Pattern 3
    Deep Cleaning
    All colors / Pattern 1 / Pattern 2 / Pattern 3
    System cleaning
    All colors / Pattern 1 / Pattern 2 / Pattern 3
    Print head alignment
    Auto (standard)
    Roll paper 1 / Roll paper 2 / Manual
    Auto (advanced)
    Roll paper 1 / Roll paper 2 / Manual
    Manual
    Roll paper 1 / Roll paper 2 / Manual
    Paper feed adjustment
    Set priority
    Adjust print quality
    Auto
    Roll paper 1 / Roll paper 2 / Manual
    Manual
    Roll paper 1 / Roll paper 2 / Manual
    Adjust feed length
    Print alignment pattern
    Roll paper 1 / Roll paper 2 / Manual
    Change adjustment values
    -0.70% / -0.68% / ... / 0.68% / 0.70%
    Color calibration
    Auto adjust
    Roll paper 1 / Roll paper 2 / Manual
    Enable/disable adjustment values
    Enable* / Disable
    Adjustment information
    Roll paper 1 / Roll paper 2 / Manual
    Calibration guide setting
    Enable / Disable*
    Reset adjustment values
    Maintenance cartridge info
    Maintenance cartridge usage
    Replace
    Head replacement
    Replace cutter blade unit
    Platen cleaning
    Prepare to move
    Move indoors on the same floor
    Move indoors to a different floor
    Transport outdoors
  • Job management

    Print job
    List of print jobs
    Del. selected / Delete / Priority printing
    Saved job
    Job box list
    Job list
    Delete / Print settings
    Print the job list
    Job history
    Display job history
    Print job history
    Pause printing
    Enable / Disable*
    Delete all print jobs
  • Print from USB flash drive

    Folder/file list
    Number of copies
    Preview
    Settings
    Color
    Color (perceptual)* / Color (saturation) / Color (correct off) / Monochrome
    Print qlty
    5 (Fast) / 4 / 3* / 2 / 1 (High)
    Paper src
    Auto select* / Roll paper (auto) / Roll paper 1 / Roll paper 2 / Manual
    Margin
    3mm* / 5mm
    Border
    Bordered* / None
    Rotate
    0 degrees* / 90 degrees
    Enl./Red.
    Fit paper* / Same size / Scaling
  • LAN settings

    Wi-Fi
    Connection
    Network name (SSID)
    Communication mode
    Channel
    Wi-Fi security
    IPv4 address
    IPv4 subnet mask
    IPv4 default gateway
    IPv4 DNS dynamic setting
    IPv4 DNS host name
    IPv4 DNS domain name
    IPv6 link-local address
    IPv6 link-local prefix length
    IPv6 manual address
    IPv6 manual prefix length
    IPv6 stateless address 1
    IPv6 stateless prefix length 1
    IPv6 stateless address 2
    IPv6 stateless prefix length 2
    IPv6 stateless address 3
    IPv6 stateless prefix length 3
    IPv6 stateless address 4
    IPv6 stateless prefix length 4
    DHCPv6
    DHCPv6 stateful address
    DHCPv6 stateful prefix length
    IPv6 default gateway 1
    IPv6 default gateway 2
    IPv6 default gateway 3
    IPv6 default gateway 4
    IPv6 primary DNS server address
    IPv6 secondary DNS server add.
    IPv6 DNS dyn. update: manual
    IPv6 DNS dyn. update: stateless
    IPv6 DNS dyn. update: stateful
    IPv6 Use IPv4 host/domain name
    IPv6 DNS host name
    IPv6 DNS domain name
    MAC address
    IPsec settings
    Printer name
    Bonjour service name
    Settings
    Enable/disable Wi-Fi
    Enable / Disable
    Wi-Fi setup
    Easy wireless connect
    Manual connect
    WPS (Push button method)
    Other connection types
    Manual connect (adv.)
    WPS (PIN code method)
    Advanced
    Wireless Direct
    Connection
    Network (SSID)/device name
    Password
    Communication mode
    Channel
    Wi-Fi security
    IPv4 address
    IPv4 subnet mask
    IPv4 default gateway
    IPv4 DNS dynamic setting
    IPv4 DNS host name
    IPv4 DNS domain name
    IPv6 link-local address
    IPv6 link-local prefix length
    MAC address
    IPsec settings
    Printer name
    Bonjour service name
    Settings
    Enable/disable Wireless Direct
    Yes / No
    Update SSID/password
    Yes / No
    Wireless Direct device name
    Connection request confirmation
    ON* / OFF
    Advanced
    Wired LAN
    Connection
    IPv4 address
    IPv4 subnet mask
    IPv4 default gateway
    IPv4 DNS dynamic setting
    IPv4 DNS host name
    IPv4 DNS domain name
    IPv6 link-local address
    IPv6 link-local prefix length
    IPv6 manual address
    IPv6 manual prefix length
    IPv6 stateless address 1
    IPv6 stateless prefix length 1
    IPv6 stateless address 2
    IPv6 stateless prefix length 2
    IPv6 stateless address 3
    IPv6 stateless prefix length 3
    IPv6 stateless address 4
    IPv6 stateless prefix length 4
    DHCPv6
    DHCPv6 stateful address
    DHCPv6 stateful prefix length
    IPv6 default gateway 1
    IPv6 default gateway 2
    IPv6 default gateway 3
    IPv6 default gateway 4
    IPv6 primary DNS server address
    IPv6 secondary DNS server add.
    IPv6 DNS dyn. update: manual
    IPv6 DNS dyn. update: stateless
    IPv6 DNS dyn. update: stateful
    IPv6 Use IPv4 host/domain name
    IPv6 DNS host name
    IPv6 DNS domain name
    MAC address
    IPsec settings
    Printer name
    Bonjour service name
    Settings
    Enable/disable Wired LAN
    Enable / Disable
    Advanced
    Print details
  • Device settings

    Test print
    Nozzle Check
    Status print
    Status print (administrator)
    Print LAN details
    Print setting print
    Print advanced paper settings
    Print job history
    Print menu map
    Print settings
    Print head movable width setting
    Data width* / Maximum movable width / Paper width
    Prioritize paper size
    Enable / Disable*
    Magnification level for borderless
    Large / Medium* / Small / Minimum
    PDF print settings
    Print quality settings
    Color mode
    Color (perceptual)* / Color (saturation) / Color (correct off) / Monochrome
    Print quality
    5 (Standard) / 4 / 3* / 2 / 1 (Highest)
    Input resolution
    600 dpi / 300 dpi*
    Paper settings
    Paper src
    Auto select* / Roll paper (auto) / Roll paper 1 / Roll paper 2 / Manual
    Margin
    3mm* / 5mm
    Border
    Borderless / Bordered*
    Rotate
    0 degrees* / 90 degrees
    Enlarge/Reduce
    Fit paper size* / Same size / Scaling
    Display during process
    Warning display
    Enable / Disable*
    JPEG print settings
    Print quality settings
    Color mode
    Color (perceptual)* / Color (saturation) / Color (correct off) / Monochrome
    Print quality
    5 (Standard) / 4 / 3* / 2 / 1 (Highest)
    Input resolution
    600 dpi / 300 dpi*
    Paper settings
    Paper src
    Auto select* / Roll paper (auto) / Roll paper 1 / Roll paper 2 / Manual
    Margin
    3mm* / 5mm
    Border
    Borderless / Bordered*
    Rotate
    0 degrees* / 90 degrees
    Enlarge/Reduce
    Fit paper size* / Same size / Scaling
    Print from USB flash settings
    Print quality settings
    Color mode
    Color (perceptual)* / Color (saturation) / Color (correct off) / Monochrome
    Print quality
    5 (Standard) / 4 / 3* / 2 / 1 (Highest)
    Paper settings
    Paper src
    Auto select* / Roll paper (auto) / Roll paper 1 / Roll paper 2 / Manual
    Margin
    3mm* / 5mm
    Border
    Borderless / Bordered*
    Rotate
    0 degrees* / 90 degrees
    Enlarge/Reduce
    Fit paper size* / Same size / Scaling
    AirPrint print settings
    Print quality settings
    Color mode
    Color (perceptual)* / Color (saturation) / Color (correct off) / ICC profile (perceptual) / ICC profile (saturation) / ICC profile (relative) / ICC profile (absolute)
    Clear coating
    Auto* / Overall / OFF
    Paper settings
    No spaces at top or bottom
    ON / OFF*
    Unidirectional printing
    Enable / Disable*
    Direct print settings from FTP
    Print settings 1
    Print quality settings
    Color mode
    Color (perceptual)* / Color (saturation) / Color (correct off) / Monochrome
    Print quality
    5 (Standard) / 4 / 3* / 2 / 1 (Highest)
    Paper settings
    Paper src
    Auto select* / Roll paper (auto) / Roll paper 1 / Roll paper 2 / Manual
    Margin
    3mm* / 5mm
    Border
    Borderless / Bordered*
    Rotate
    0 degrees* / 90 degrees
    Enlarge/Reduce
    Fit paper size* / Same size / Scaling
    Print settings 2
    Print quality settings
    Color mode
    Color (perceptual)* / Color (saturation) / Color (correct off) / Monochrome
    Print quality
    5 (Standard) / 4 / 3* / 2 / 1 (Highest)
    Paper settings
    Paper src
    Auto select* / Roll paper (auto) / Roll paper 1 / Roll paper 2 / Manual
    Margin
    3mm* / 5mm
    Border
    Borderless / Bordered*
    Rotate
    0 degrees* / 90 degrees
    Enlarge/Reduce
    Fit paper size* / Same size / Scaling
    Print settings 3
    Print quality settings
    Color mode
    Color (perceptual)* / Color (saturation) / Color (correct off) / Monochrome
    Print quality
    5 (Standard) / 4 / 3* / 2 / 1 (Highest)
    Paper settings
    Paper src
    Auto select* / Roll paper (auto) / Roll paper 1 / Roll paper 2 / Manual
    Margin
    3mm* / 5mm
    Border
    Borderless / Bordered*
    Rotate
    0 degrees* / 90 degrees
    Enlarge/Reduce
    Fit paper size* / Same size / Scaling
    Print settings 4
    Print quality settings
    Color mode
    Color (perceptual)* / Color (saturation) / Color (correct off) / Monochrome
    Print quality
    5 (Standard) / 4 / 3* / 2 / 1 (Highest)
    Paper settings
    Paper src
    Auto select* / Roll paper (auto) / Roll paper 1 / Roll paper 2 / Manual
    Margin
    3mm* / 5mm
    Border
    Borderless / Bordered*
    Rotate
    0 degrees* / 90 degrees
    Enlarge/Reduce
    Fit paper size* / Same size / Scaling
    Default print settings
    Print quality settings
    Color mode
    Color (perceptual)* / Color (saturation) / Color (correct off) / Monochrome
    Print quality
    5 (Standard) / 4 / 3* / 2 / 1 (Highest)
    Clear coating
    Auto* / Overall / OFF
    Print setting print
    Yes / No
    LAN settings
    The lower items of this menu are the same as the lower items of LAN settings.
    Paper-related settings
    Roll paper auto feed
    Enable* / Disable
    Media type selection method
    Manual / Auto detect / Auto with confirmation* / Use current media type
    Manage remaining roll amount
    Barcodes / Auto estimate* / Disable
    Roll amount warning setting
    Roll amount 6 (earlier warning) / Roll amount 5 / Roll amount 4 / Roll amount 3 (standard)* / Roll amount 2 / Roll amount 1 (later warning)
    Switch roll paper when low
    Enable / Disable*
    Roll paper auto switching
    Identify size* / Do not identify size
    Detect paper setting mismatch
    Pause / Display warning* / Do not detect / Hold job
    Paper retention setting
    Release / While feeding*
    Paper size recognition settings
    Cut sheet setting 1
    Cut sheet setting 2
    Roll paper setting 1
    Roll paper setting 2
    Roll paper setting 3
    Roll paper setting 4
    Roll paper setting 5
    Roll paper setting 6
    Roll paper setting 7
    Adjust roll unit
    Keep margin at cut sheet end
    Enable / Disable*
    Advanced paper settings
    Print advanced paper settings
    Yes / No
    Reset all detection priority data
    Yes / No
    Reset paper settings for all paper
    Yes / No
    Auto maintenance settings
    Auto nozzle check
    Standard* / 1 page / 10 pages / Disable
    Nozzle check error display
    Enable / Disable*
    System cleaning frequency
    Standard* / Short
    Print pattern after new head
    ON* / OFF
    Hard disk settings
    Output method
    Print* / Print (auto delete) / Save to job box
    Save first and print
    ON / OFF*
    Common job box setting
    Print* / Print (auto delete)
    Data deletion
    Fast / Fast secure / Secure / Secure (VSITR)
    Monitoring service settings
    Enable/disable monitoring service
    Enable / Disable*
    Communication test
    Yes / No
    Communication log
    Timing for ink level notification
    Standard* / Earlier notification
    Other device settings
    Energy saving settings
    Auto power off
    5 minutes / 10 min. / 30 min. / 1 hour / 4 hours / 8 hours / 12 hours / OFF
    Sleep timer
    5 minutes* / 10 min. / 15 min. / 20 min. / 30 min. / 40 min. / 50 min. / 60 min.
    Operation restrictions
    Job history
    Restrict / Do not restrict*
    Remote UI
    Restrict / Do not restrict*
    Print from USB flash drive
    Restrict / Do not restrict*
    Use USB connection
    Use* / Do not use
    Date/time setting
    Date display format
    YYYY/MM/DD, MM/DD/YYYY, DD/MM/YYYY
    Time zone (GMT)
    0 / +1 / +2 / +3 / +4 / +5 / +6 / +7 / +8 / +9 / +10 / +11 / +12 / -12 / -11 / -10 / -9 / -8 / -7 / -6 / -5 / -4 / -3 / -2 / -1
    Length unit setting
    Meters* / Feet/inches
    Buzzer setting
    Enable* / Disable
    EOP timer setting
    1 minute / 2 minutes / 5 minutes / 10 minutes* / 30 minutes / 60 minutes
    Job history sending setting
    Send / Do not send*
    Printer info sending settings
    Agree / Do not agree
    Menu row height
    Wide* / Standard
    Language selection
    Firmware update
    Install update
    Check current version
    Update notification setting
    DNS server setup
    Auto setup* / Manual setup
    Proxy server setup
    Use / Do not use*
    Administrator password setting
    Remote UI or other tools / LCD, Remote UI, or other tools
  • Printer information

    System information
    Hard disk information
    Error history
    Hardware error
    Recoverable error
    Paper feed/transfer error
    Usage totals
    Total print area
    Ink consumed
    Duty counter
    Head information
    Head alignment performance log
    Values applied with auto settings
    Paper Thickness (Head Height)
    Transport unit vacuum strength