Updating Printer Firmware
Important
- Make sure the printer is connected to Internet before updating printer firmware.
Follow the procedure below.
Updating Printer Firmware from Operation Panel
-
Check that printer is turned on and display HOME screen.
If the HOME screen is not displayed, press the HOME button.
-
Select Various settings on HOME screen and press the OK button.
The setup menu screen appears.
-
Select Printer settings and press the OK button.
-
Select Firmware update and press the OK button.
-
Select Install update and press the OK button.
-
Check displayed message and select Yes and press the OK button.
-
Check displayed message and select Start update and press the OK button.
Update starts.
Finishing update turns off the printer and it turns on again.
-
Check displayed message and press the OK button.
Updating Printer Firmware from Remote UI
-
Select Firmware update.
-
Select Install update.
-
Check displayed message and select Update.
Update starts and returns to the menu screen when update is completed.