LAN settings
-
Change LAN
Enables either wireless LAN, wired LAN, or direct connection. You can also disable all.
-
Wireless LAN setup
Selects the setup method for wireless LAN connection.
Note
-
You can also enter this setting menu by selecting LAN settings on the HOME screen. In this case, enable wireless LAN.
-
Cableless setup
Select if you specify the settings of the access point information to the machine directly from a device (such as a smartphone) without operating the wireless router. Follow the on-screen instructions of the connecting device for the setup procedure.
-
Standard setup
Select when you perform settings for wireless LAN manually using the operation panel of the machine.
-
WPS (Push button method)
Select when you perform settings for wireless LAN using a wireless router supporting a Wi-Fi Protected Setup (WPS) push button method. Follow the on-screen instructions during setup.
-
Other setup
-
Advanced setup
Select when you perform settings for wireless LAN manually. You can specify multiple WEP keys.
-
WPS (PIN code method)
Select when you perform settings for wireless LAN using a wireless router supporting a Wi-Fi Protected Setup (WPS) PIN code method. Follow the on-screen instructions during setup.
-
-
-
Confirm LAN settings
The list of wireless/wired LAN settings or the direct connection of this machine is displayed on the touch screen. Selecting Print LAN details allows you to print the list.
-
WLAN setting list
The list of wireless LAN settings of this machine is displayed on the touch screen.
The following setting items are displayed.
Items
Setting
Connection
Active/Inactive
SSID
XXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXX (up to 32 characters)Communication mode
Infrastructure
Channel
XX (up to 2 digits)
Wireless LAN security
Inactive/WEP(64bit)/WEP(128bit)/WPA-PSK(TKIP)/WPA-PSK(AES)/WPA2-PSK(TKIP)/WPA2-PSK(AES)
IPv4 address
XXX. XXX. XXX. XXX (12 characters)
IPv4 subnet mask
XXX. XXX. XXX. XXX (12 characters)
IPv4 default gateway
XXX. XXX. XXX. XXX (12 characters)
IPv6 address
XXXX: XXXX: XXXX: XXXX:
XXXX: XXXX: XXXX: XXXX (32 characters)IPv6 subnet prefix length
XXX (up to 3 digits)
IPv6 default gateway
XXXX: XXXX: XXXX: XXXX:
XXXX: XXXX: XXXX: XXXX (32 characters)MAC address
XX:XX:XX:XX:XX:XX (12 characters)
IPsec settings
Enable (ESP)/Enable (ESP & AH)/Enable (AH)/Disable
Pre-shared key
XXXXXXXXXXXXXXXX (16 characters)
Printer name
XXXXXXXXXXXXXXX (up to 15 characters)
Bonjour service name
XXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX (up to 52 characters)("XX" represents alphanumeric characters.)
-
LAN setting list
The list of wired LAN settings of this machine is displayed on the touch screen.
The following setting items are displayed.
Items
Setting
Connection
Active/Inactive
IPv4 address
XXX. XXX. XXX. XXX (12 characters)
IPv4 subnet mask
XXX. XXX. XXX. XXX (12 characters)
IPv4 default gateway
XXX. XXX. XXX. XXX (12 characters)
IPv6 address
XXXX: XXXX: XXXX: XXXX:
XXXX: XXXX: XXXX: XXXX (32 characters)IPv6 subnet prefix length
XXX (up to 3 digits)
IPv6 default gateway
XXXX: XXXX: XXXX: XXXX:
XXXX: XXXX: XXXX: XXXX (32 characters)MAC address
XX:XX:XX:XX:XX:XX (12 characters)
IPsec settings
Enable (ESP)/Enable (ESP & AH)/Enable (AH)/Disable
Pre-shared key
XXXXXXXXXXXXXXXX (16 characters)
Printer name
XXXXXXXXXXXXXXX (up to 15 characters)
Bonjour service name
XXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX (up to 52 characters)("XX" represents alphanumeric characters.)
-
Direct connection setting list
The list of direct connection settings of this machine is displayed on the touch screen.
The following setting items are displayed.
Items
Setting
Connection
Active/Inactive
SSID
DIRECT-XXXX-XXXXXXseries
Password
XXXXXXXXXX (10 characters)
Communication mode
Direct connection
Channel
3
Wireless LAN security
WPA2-PSK(AES)
IPv4 address
XXX. XXX. XXX. XXX (12 characters)
IPv4 subnet mask
XXX. XXX. XXX. XXX (12 characters)
IPv4 default gateway
XXX. XXX. XXX. XXX (12 characters)
IPv6 address
XXXX: XXXX: XXXX: XXXX:
XXXX: XXXX: XXXX: XXXX (32 characters)IPv6 subnet prefix length
XXX (up to 3 digits)
IPv6 default gateway
XXXX: XXXX: XXXX: XXXX:
XXXX: XXXX: XXXX: XXXX (32 characters)MAC address
XX:XX:XX:XX:XX:XX (12 characters)
IPsec settings
Disable
Pre-shared key
XXXXXXXXXXXXXXXX (16 characters)
Printer name
XXXXXXXXXXXXXXX (up to 15 characters)
Bonjour service name
XXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX (up to 52 characters)Direct connection device name
XXXXXX-XXXXXXseries
("XX" represents alphanumeric characters.)
-
Print LAN details
You can print out the network settings of the machine such as its IP address and SSID.
For more information on the machine's network setting is printed out:
Important
-
The network settings printout contains important information about your network. Handle it with care.
-
-
-
Other settings
Important
-
You cannot select the items below when Disable LAN is selected for Change LAN.
-
Set printer name
Specifies the printer name. You can use up to 15 characters for the name.
Note
-
You cannot change this setting with the memory card inserted in the card slot.
-
You cannot use the same printer name as that already used for other LAN connected devices.
-
You cannot use a hyphen for the initial or last character of the printer name.
-
-
TCP/IP settings
Performs IPv4 or IPv6 setting.
-
WSD setting
Setting items when you use WSD (one of the network protocols supported in Windows 8.1, Windows 8, Windows 7, and Windows Vista).
-
Enable/disable WSD
Selects whether WSD is enabled or disabled.
Note
-
When this setting is enabled, the printer icon is displayed on the Network Explorer in Windows 8.1, Windows 8, Windows 7, and Windows Vista.
-
-
WSD scan from this device
Selecting Enable allows you to transfer the scanned data to the computer using WSD.
-
Timeout setting
Specifies the timeout length.
-
-
Bonjour settings
Setting items for LAN using Bonjour for Mac OS.
-
Enable/disable Bonjour
Selecting Enable allows you to use Bonjour to perform the network settings.
-
Service name
Specifies the Bonjour service name. You can use up to 48 characters for the name.
Note
-
You cannot use the same service name as that already used for other LAN connected devices.
-
-
-
LPR protocol setting
Enables/disables the LPR setting.
-
PictBridge communication
Setting items for printing from a PictBridge (Wireless LAN) compliant device.
-
Enable/disable communication
Selecting Enable allows you to print from a PictBridge (Wireless LAN) compliant device.
-
Timeout setting
Specifies the timeout length.
-
-
Wired LAN DRX setting
Selecting Enable allows you to activate discontinuous reception when the machine is connected to a device compatible with wired LAN. It allows you to save electricity.
-
Direct connection settings
Setting items are available when you connect a wireless communication device such as a smartphone or tablet to the machine.
Important
-
You can select these setting items only when Activate direct connect. is selected for Change LAN.
-
Update SSID/password
Selecting Yes updates the identifier (SSID) and password for direct connection.
-
Change device name
Changes the machine's name displayed on a Wi-Fi Direct compatible device.
-
Connection request confirmation
Selecting Yes displays the confirmation screen when a Wi-Fi Direct compatible device is connecting the machine.
-
-