Printing Network Settings

Use the operation panel to print the machine's current network settings.

Important

• The network settings printout contains important information about your network. Handle it with care.

1. Make sure machine is turned on.

2. Load two sheets of A4 or Letter-sized plain paper.

3. Flick HOME screen and tap Setup.

   Using the Operation Panel

   The menu screen appears.

4. Tap Device settings.

5. Tap LAN settings.

6. Tap Confirm LAN settings.

7. Tap Print LAN details.

8. Tap Yes.

   The machine starts printing network settings information.

   The printed network settings information is as follows:

   Item	Description	Setting
   Product Information	Product information	–
   Product Name	Product name	XXXXXXXX
   ROM Version	ROM version	XXXXXXXX
   Serial Number	Serial number	XXXXXXXX
   Wireless LAN	Wireless LAN	Enable/Disable
   MAC Address	MAC address	XX:XX:XX:XX:XX:XX
   Infrastructure	Infrastructure	Enable/Disable
   Connection	Connection status	Active/Inactive
   SSID	SSID	Wireless LAN SSID
   Channel *1	Channel	XX (1 to 11)
   Encryption	Encryption method	None/WEP/TKIP/AES
   WEP Key Length	WEP key length (bits)	Inactive/128/64
   Authentication	Authentication method	None/auto/open/shared/WPA-PSK/WPA2-PSK
   Signal Strength	Signal strength	0 to 100 [%]
   TCP/IPv4	TCP/IPv4	Enable
   IP Address	IP address	XXX.XXX.XXX.XXX
   Subnet Mask	Subnet mask	XXX.XXX.XXX.XXX
   Default Gateway	Default gateway	XXX.XXX.XXX.XXX
   TCP/IPv6	TCP/IPv6	Enable/Disable
   IP Address *2	IP address	XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX
   Subnet Prefix Length *2	Subnet prefix length	XXX
   Default Gateway *2	Default gateway	XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX
   IPsec *3	IPsec setting	Active
   Security Protocol *3	Security method	ESP/ESP & AH/AH
   Direct Connection	Direct connection	Enable/Disable
   Connection	Connection status	Active/Inactive
   SSID	SSID	Direct Connection SSID
   Password	Password	Direct Connection password (10 alphanumeric characters)
   Channel	Channel	3
   Encryption	Encryption method	AES
   Authentication	Authentication method	WPA2-PSK
   TCP/IPv4	TCP/IPv4	Enable
   IP Address	IP address	XXX.XXX.XXX.XXX
   Subnet Mask	Subnet mask	XXX.XXX.XXX.XXX
   Default Gateway	Default gateway	XXX.XXX.XXX.XXX
   TCP/IPv6	TCP/IPv6	Enable/Disable
   IP Address *2	IP address	XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX
   Subnet Prefix Length *2	Subnet prefix length	XXX
   Default Gateway *2	Default gateway	XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX
   IPsec *3	IPsec setting	Active
   Security Protocol *3	Security method	–
   Wired LAN	Wired LAN	Enable/Disable
   MAC Address	MAC address	XX:XX:XX:XX:XX:XX/Disable
   Connection	Wired LAN status	Active/Inactive
   TCP/IPv4	TCP/IPv4	Enable
   IP Address	IP address	XXX.XXX.XXX.XXX
   Subnet Mask	Subnet mask	XXX.XXX.XXX.XXX
   Default Gateway	Default gateway	XXX.XXX.XXX.XXX
   TCP/IPv6	TCP/IPv6	Enable/Disable
   IP Address *2	IP address	XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX
   Subnet Prefix Length *2	Subnet prefix length	XXX
   Default Gateway *2	Default gateway	XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX
   IPsec *3	IPsec setting	Active
   Security Protocol *3	Security method	ESP/ESP & AH/AH
   Wired LAN DRX	Discontinuous reception (wired LAN)	Enable/Disable
   Other Settings	Other settings	–
   Printer Name	Printer name	Printer name (Up to 15 alphanumeric characters)
   Direct Conn. DevName	Device name for direct connection	Device name for direct connection (Up to 32 characters)
   WSD Printing	WSD printing setting	Enable/Disable
   WSD Timeout	Timeout	1/5/10/15/20 [min]
   LPD Printing	LPD printing setting	Enable/Disable
   Bonjour	Bonjour setting	Enable/Disable
   Bonjour Service Name	Bonjour service name	Bonjour service name (Up to 52 alphanumeric characters)
   PictBridge Commun.	PictBridge communication	Enable/Disable
   DNS Server	Obtain DNS server address automatically	Auto/Manual
   Primary Server	Primary server address	XXX.XXX.XXX.XXX
   Secondary Server	Secondary server address	XXX.XXX.XXX.XXX
   Proxy Server	Proxy server setting	Enable/Disable
   Proxy Address	Proxy address	XXXXXXXXXXXXXXXXXXXX
   Proxy Port	Proxy port specification	1 to 65535

   ("XX" represents alphanumeric characters.)

   *1 Channel may range from 1 to 11 depending on country or region of purchase.

   *2 Network status is only printed when IPv6 is enabled.

   *3 Network status is only printed when IPv6 and IPsec settings are enabled.