PictBridge (Wireless LAN) Print Settings
Settings on PictBridge (Wireless LAN) Compliant Device
Settings on PictBridge (Wireless LAN) Compliant Device
This section describes the PictBridge (Wireless LAN) function of the machine. For the print settings on a PictBridge (Wireless LAN) compliant device, refer to the instructions given in the device's instruction manual.
Note
-
In the following description, names of setting items are given according to those used in Canon-brand PictBridge (Wireless LAN) compliant devices. Setting item names may be different depending on the brand or model of your device.
-
Some setting items explained below may not be available on some devices. In this case, the settings made on the machine are applied. Also, when some items are set to Default on a PictBridge (Wireless LAN) compliant device, the machine settings for these items are applied.
-
Depending on the PictBridge (Wireless LAN) compliant device, you can print a photo onto the disc label of the printable disc.
The following settings can be used when printing from a PictBridge (Wireless LAN) compliant device.
Paper size |
4" x 6"/ 10 x 15 cm, 5" x 7"/ 13 x 18 cm*, 8" x 10"/ 20 x 25 cm, A4, 8.5" x 11"(Letter) * Can be selected only on certain Canon-brand PictBridge (Wireless LAN) compliant devices. (May not be selected depending on the device.) |
Paper type |
|
Layout |
Default (Selections based on the machine setting), Index, Bordered, Borderless, N-up (2, 4, 9, 16)*1, 20-up*2, 35-up*3 *1 Layout compatible with A4 or Letter-sized paper and Canon-brand sticker above. -A4/Letter: 4-up -Photo Stickers: 2-up, 4-up, 9-up, 16-up. *2 With a Canon brand PictBridge (Wireless LAN) compliant device, selecting items with "i" mark allows you to print shooting info (Exif Data) in list format (20-up) or on the margins of the specified data (1-up). (May not be available with some Canon-brand PictBridge (Wireless LAN) compliant devices.) *3 Printed in 35 mm Film Style Layout (Contact Printing Layout). Available only with a Canon-brand PictBridge (Wireless LAN) compliant device. (May not be available with some Canon-brand PictBridge (Wireless LAN) compliant devices.) |
Print date & file no. |
Default (Off: No printing), Date, File No., Both, Off |
Image optimize |
Default (Selections based on the machine setting), On (Auto photo fix)*1, Off, Red-Eye correction*2 *1 The scene or person's face of a shot photo is recognized and the most suitable correction for each photo is made automatically. It makes a darkened face by backlight brighter to print. It also analyzes a scene such as scenery, night scene, person, etc. and corrects each scene with the most suitable color, brightness, or contrasts automatically to print. *2 Can be selected only on certain Canon-brand PictBridge (Wireless LAN) compliant devices. (May not be selected depending on the device.) |
Trimming |
Default (Off: No trimming), On (follow the camera's setting), Off |
Settings on Machine
You can change the PictBridge (Wireless LAN) print settings from the PictBridge print settings screen. Set the print settings to Default on the PictBridge (Wireless LAN) compliant device when you want to print according to the settings on the machine.
This section describes the procedure to display the PictBridge print settings screen.
-
Flick HOME screen and tap Setup.
-
Tap Device settings.
-
Tap PictBridge print settings.
-
Check message that is displayed and tap OK.
-
Tap Photo print setting.
The PictBridge print settings screen is displayed.
For more on the setting items:
Note
-
If you select Disc label print setting, the Set disc print area screen is displayed to change the disc label print setting.
-