Default Network Settings
LAN Connection Defaults
Item |
Default |
---|---|
Change LAN |
Disable LAN |
SSID |
BJNPSETUP |
Communication mode |
Infrastructure |
Wireless LAN security |
Disable |
IP address (IPv4) |
Auto setup |
IP address (IPv6) |
Auto setup |
Set printer name* |
XXXXXXXXXXXX |
Enable/disable IPv6 |
Enable |
Enable/disable WSD |
Enable |
Timeout setting |
1 minute |
Enable/disable Bonjour |
Enable |
Service name |
Canon MG7700 series |
LPR protocol setting |
Enable |
PictBridge communication |
Enable |
Wired LAN DRX setting |
Enable |
("XX" represents alphanumeric characters.)
* Default value depends on machine. To check value, use operation panel.
Direct Connection Defaults
Item |
Default |
---|---|
SSID (Identifier for direct connection) |
DIRECT-xxXX-MG7700series *1 |
Password |
YYYYYYYYYY *2 |
Wireless LAN security |
WPA2-PSK (AES) |
Direct connection device name |
ZZZZZZ-MG7700series *3 |
Connection request confirmation |
Displayed |
*1 "xx" represents alphanumeric characters. "XX" represents last two digits of machine's MAC address.
*2 The password is specified automatically.
*3 "ZZZZZZ" represents last six digits of machine's MAC address.