Setting Telephone Line Type
Before using your printer, make sure you set the correct telephone line type for your telephone line. If you are unsure of your telephone line type, contact your telephone company. For xDSL or ISDN connections, contact the telephone company or service provider to confirm your line type.
Important
-
For users in China:
After plugging the power cord and turning on the printer, the telephone line type is selected automatically. However, if the printer is connected to the control device such as an xDSL modem or terminal adapter, the telephone line type may not be selected correctly.
In this case, set the line type manually.
For details on how to set the Telephone line type manually in China:
Note
- Telephone line type will not appear in countries or regions where Rotary pulse is not supported.
-
You can print USER'S DATA LIST to check the current setting.
-
Flick HOME screen, and then tap
Setup. -
Tap
Device settings. -
Tap FAX settings.
-
Tap FAX user settings.
-
Tap Telephone line type.
-
Tap a telephone line type.
- Rotary pulse
- Select when your telephone line type is pulse dialing.
- Touch tone
- Select when your telephone line type is tone dialing.
Setting the Telephone Line Type Manually in China
This section describes the procedure to set the telephone line type manually in China.
-
Flick HOME screen, and then tap
Setup. -
Tap
Device settings. -
Tap FAX settings.
-
Tap FAX user settings.
-
Tap Telephone line auto selection.
The current telephone line type is displayed.
-
Check current telephone line type, and then tap OK.
Note- If you do not need to change the telephone line type, press the HOME button to return to the HOME screen.
-
Tap OFF.
-
Tap a telephone line type.
- Rotary pulse
-
Select when your telephone line type is pulse dialing.
- Touch tone
-
Select when your telephone line type is tone dialing.
