skip to main text

Device user settings

Select this setting item from Device settings on Setup.

Important

  • The administrator password is required to change settings if it is enabled for changing settings using the operation panel.

  • Date/time setting

    Sets the current date and time.

    For more on the procedure:

  • Date display format

    Sets the format of dates displayed on the touch screen and printed on sent faxes and photos.

    Note

  • Daylight saving time setting

    Enables/disables the summer time setting. If you select ON, you can select additional sub-settings. This setting may not be available depending on the country or region of purchase.

    • Start date/time

      Sets the date and time that summer time starts.

      Month: Specify the month.

      Week: Specify the week.

      DOW: Specify the day of the week.

      The screen to set the shift time to start summer time will be displayed after specifying the items above and tapping OK.

      After specifying the shift time and tapping OK, you can specify the end date/time.

    • End date/time

      Sets the date and time that summer time ends.

      Month: Specify the month.

      Week: Specify the week.

      DOW: Specify the day of the week.

      The screen to set the shift time to end summer time will be displayed after specifying the items above and tapping OK.

      Specify the shift time and tap OK.

  • Time zone

    Specifies the time zone according to a country or region you live in.

    Specifying the time zone allows you to display the correct time and date an e-mail was sent on your mail software.

    For more on the time zone for each country or region:

  • Sound control

    Selects the volume.

    • Keypad volume

      Selects the beep volume when tapping the touch screen or the buttons on the operation panel.

    • Alarm volume

      Selects the alarm volume.

    • Line monitor volume

      Selects the line monitor volume.

    • Offhook alarm

      Selects the alarm volume when the phone receiver is not put on the hook properly.

  • Country or region

    Selects the country or region where you are using the printer.

    Note

    • This setting may not be available depending on the country or region of purchase.

  • Device info sending setting

    Selects whether you will send the printer usage information to Canon. The information sent to Canon will be utilized to develop better products. Select Agree to send the printer usage information to Canon.

  • Power control

    Allows you to turn on/off the printer automatically to save electricity. In addition, you can specify the time and day to turn it on/off.

    • Enable auto power control

      Specifies the length of time to turn off the printer automatically when no operation is made or no printing data is sent to the printer. In addition, you can allow the printer to turn on automatically when a scanning command from a computer or printing data is sent to the printer.

    • Enable scheduling

      Specifies the time to turn on/off the printer automatically for each day.

    • Do not control power

      Disables the function to turn on/off the printer automatically.

      Note

      • You can also enter this setting menu by selecting ECO settings and Power control on the HOME screen.