Turning the Machine On and Off

Press the ON button to turn the machine on.

The POWER lamp flashes and then remains lit.

• Confirming that the Power Is On

Note

• After you turn the machine on, it requires a warm-up period of about 20 seconds before any operations. Wait until the HOME screen is displayed.
• If the Alarm lamp lights up or flashes and an error message appears on the touch screen, see Message Appears.

• You can schedule automatic power-on at specified times on specified days of the week.

  • ECO settings

• You can set the machine to turn on automatically when printing is started from a machine connected by USB or network or when scanning or fax reception is started. This feature is disabled by default.

  • ECO settings

Press the ON button to turn the machine off.

Once the POWER lamp stops flashing, the machine goes off.

Important

• Before unplugging the machine after turning it off, confirm that the POWER lamp is off.

Note

• Remember that faxes cannot be sent or received while the machine is off.
• The power cannot be turned off while the machine is sending or receiving a fax, or when unsent faxes are stored in the machine's memory.

• You can schedule automatic power-off at specified times on specified days of the week.

  • ECO settings

• You can set the machine to turn off automatically after a specified period when no operations are performed or print jobs are received from a computer. (The machine cannot be turned off when a telephone is connected.) This feature is enabled by default.

  • ECO settings