Device user settings
Select this setting item from Device settings on Setup.
Important
- The administrator password is required to change settings if it is enabled for changing settings using the operation panel.
-
Date/time setting
Sets the current date and time.
For more on the procedure:
-
Date display format
Sets the format of dates displayed on the LCD and printed on sent faxes and photos.
Note
-
When ON is selected for Print date on the print settings screen in printing from a USB flash drive, the shooting date is printed in the date display format you selected.
-
-
Daylight saving time setting
Enables/disables the summer time setting. If you select ON, you can select additional sub-settings. This setting may not be available depending on the country or region of purchase.
-
Start date/time
Sets the date and time that summer time starts.
Month: Specify the month.
Week: Specify the week.
DOW: Specify the day of the week.
The screen to set the shift time to start summer time will be displayed after specifying the items above and pressing the OK button.
After specifying the shift time and pressing the OK button, you can specify the end date/time.
-
End date/time
Sets the date and time that summer time ends.
Month: Specify the month.
Week: Specify the week.
DOW: Specify the day of the week.
The screen to set the shift time to end summer time will be displayed after specifying the items above and pressing the OK button.
Specify the shift time and press the OK button.
-
-
Time zone
Specifies the time zone according to a country or region you live in.
Specifying the time zone allows you to display the correct time and date an e-mail was sent on your mail software.
For more on the time zone for each country or region:
-
Sound control
Selects the volume.
-
Keypad volume
Selects the beep volume when pressing the buttons on the operation panel.
-
Alarm volume
Selects the alarm volume.
-
Line monitor volume
Selects the line monitor volume.
-
Offhook alarm
Selects the alarm volume when the phone receiver is not put on the hook properly.
-
-
Country or region
Selects the country or region where you are using the printer.
Note
- This setting may not be available depending on the country or region of purchase.
-
Key repeat
Enables/Disables continuous input by pressing and holding down the button when changing the photo displayed on the LCD, setting the zoom ratio, etc.
-
Device info sending setting
Selects whether you will send the printer usage information to Canon. The information sent to Canon will be utilized to develop better products. Select Agree to send the printer usage information to Canon.
-
Power control
Allows you to turn on/off the printer automatically to save electricity. In addition, you can specify the time and day to turn it on/off.
-
Enable auto power control
Specifies the length of time to turn off the printer automatically when no operation is made or no printing data is sent to the printer. In addition, you can allow the printer to turn on automatically when a scanning command from a computer or printing data is sent to the printer.
-
Enable scheduling
Specifies the time to turn on/off the printer automatically for each day.
-
Do not control power
Disables the function to turn on/off the printer automatically.
Note
-
You can also enter this setting menu by selecting ECO settings and Power control on the HOME screen.
-
-