Sending Same Document to Several Recipients (Sequential Broadcasting)
This printer allows you to prepare for sending the same document to a maximum of 101 recipients in one operation. The recipients can be specified by entering the fax/telephone numbers and selecting the registered recipients (the particular recipient's number and the group dial) in combination.
The following number of recipients can be specified in combination.
-
The recipient registered to the printer:
Up to 100 (total of the particular recipient's number and the group dial)
-
Entering the fax/telephone numbers or redialing:
1
Important
-
It may be possible that faxes will reach unintended recipients due to the misdialing or incorrect registration of fax/telephone numbers. When you send important documents, we recommend that you send them one by one after speaking on the telephone.
Note
-
If you frequently send documents to the same group of recipients, you can group these numbers for group dialing. This will allow you to send documents to all the recipients in the group by simply operation.
-
For details on the basic sending operations:
-
Select FAX on HOME screen.
The Fax standby screen is displayed.
-
Change send settings as necessary.
-
Specify first recipient.
Specify the first recipient with the one of the following methods.
-
By specifying with the recipient registered to the printer:
Press the left Function button and specify the recipient.
-
By entering the fax/telephone numbers:
Use the Numeric buttons to enter the recipient's fax/telephone number.
Note
-
If FAX number re-entry in Security control under FAX settings is set to ON, enter the number again.
-
-
By redialing:
Press the right Function button and select a number in the outgoing call logs.
-
-
Add recipient.
-
Select Add recipient, and then press OK button.
The list of the recipients is displayed.
-
Select a method to add recipient.
-
You can add the recipient from the registered recipients by the left Function button.
-
You can add the recipient by entering the fax/telephone numbers after pressing the center Function button if you specified a first recipient from the registered recipients.
-
You can add the recipient by selecting a number from the outgoing call logs after pressing the right Function button if you specified a first recipient from the registered recipients.
-
-
Add a recipient.
Add a recipient according to the selected method.
The Sequential broadcasting screen is displayed after specifying the multiple recipients.
-
If you want to add recipient further, repeat same procedure.
Note
- You can specify the recipient either by entering the fax/telephone number or by selecting a number from the outgoing call logs.
- If you want to delete the recipient, select a recipient that you want to delete, and then press the button.
-
-
Press Color button for color transmission, or Black button for black & white transmission.
Important
- Color transmission is available only when the recipient's fax device supports color faxing.
Note
-
To cancel a fax transmission, press the Stop button. To cancel a fax transmission while it is in progress, press the Stop button, and then follow the instructions on the LCD.
When you press the Stop button, fax transmission to all the recipients specified will be canceled. You cannot cancel a fax transmission to only one recipient.
- If documents remain in the ADF after the Stop button is pressed while scanning is in progress, Document in ADF. Select to eject document. is displayed on the LCD. By pressing OK, the remaining documents are automatically ejected.