Setting Telephone Line Type
Before using your printer, make sure you set the correct telephone line type for your telephone line. If you are unsure of your telephone line type, contact your telephone company. For xDSL or ISDN connections, contact the telephone company or service provider to confirm your line type.
Important
-
For users in China:
After plugging the power cord and turning on the printer, the telephone line type is selected automatically. However, if the printer is connected to the control device such as an xDSL modem or terminal adapter, the telephone line type may not be selected correctly.
In this case, set the line type manually.
For details on how to set the Telephone line type manually in China:
Note
- Telephone line type will not appear in countries or regions where Rotary pulse is not supported.
-
You can print USER'S DATA LIST to check the current setting.
-
Select
Setup on the HOME screen. -
Select
Device settings. -
Select FAX settings.
-
Select FAX user settings.
-
Select Telephone line type.
-
Select a telephone line type.
- Rotary pulse
- Select when your telephone line type is pulse dialing.
- Touch tone
- Select when your telephone line type is tone dialing.
Setting the Telephone Line Type Manually in China
This section describes the procedure to set the telephone line type manually in China.
-
Select
Setup on the HOME screen. -
Select
Device settings. -
Select FAX settings.
-
Select FAX user settings.
-
Select Telephone line auto selection.
The current telephone line type is displayed.
-
Check current telephone line type, and then select OK.
Note- If you do not need to change the telephone line type, press the HOME button to return to the HOME screen.
-
Select OFF.
-
Select a telephone line type.
- Rotary pulse
-
Select when your telephone line type is pulse dialing.
- Touch tone
-
Select when your telephone line type is tone dialing.
