skip to main text

Connecting with Wireless Direct

You can connect devices (e.g. computer, smartphone, or tablet) to the printer by two methods below.

  • Wireless connection (connecting devices via a wireless router)

  • Direct wireless connection (connecting devices directly without a wireless router)

This section describes Wireless Direct, which allows you to print by connecting the devices to the printer directly.

Follow the procedure below to set up and use Wireless Direct.

  1. Preparing the printer.

  2. Preparing a device to connect to the printer.

Important

  • You can connect up to 5 devices to the printer at the same time with Wireless Direct.

  • Check the usage restrictions and switch the printer to the Wireless Direct.

Changing Printer Setting to Use Wireless Direct

  1. Make sure the printer is turned on.

  2. Select (Setup) on HOME screen and then select Device settings.

    Note

    • If User management settings is enabled, the user selection screen is displayed before the HOME screen is displayed.
  3. Select LAN settings.

  4. Select Wireless Direct.

  5. Select Enable/disable Wireless Direct.

  6. Check displayed message and then select ON.

    The Wireless Direct is enabled and a device can be connected to the printer wirelessly.

    Note

    • The password is required when connecting a device to the printer. Depending on the device you are using, no password is required.

    • When you connect a Wireless Direct compatible device to the printer, select the device name from your device.

    • To change the identifier (SSID) and the password, see below.

Connecting a Smartphone/Tablet/Computer to the Printer

  1. Enable Wi-Fi function on smartphone/tablet/computer.

    Enable Wi-Fi in the Settings menu on your smartphone/tablet/computer.

    For instructions on enabling the Wi-Fi function, refer to the instruction manual for your smartphone/tablet/computer.

  2. Select (Setup) on HOME screen.

    Note

    • If User management settings is enabled, the user selection screen is displayed before the HOME screen is displayed.
  3. Select Device settings.

  4. Select LAN settings.

  5. Select Wireless Direct.

  6. Select Connect to smartphone.

  7. To connect with an iPhone/iPad, select iPhone/iPad. To connect with a non-iPhone/iPad, select Others.

    • iPhone/iPad

      1. Select QR Code.

      2. Scan the displayed QR code with the iPhone/iPad standard camera app.

        The iPhone/iPad is connected to the printer.

        Note

    • Others

      1. Select Next.

        Network name (SSID) and Password are displayed.

        Note

        • To show the password, select Show password. To hide the password, select Hide password.

        • The password is required when connecting smartphone/tablet/computer to the printer.

      2. Select "DIRECT-XXXX-GX7000series" ("X" represents alphanumeric characters) on your smartphone/tablet/computer.

        Note

      3. Enter Password on smartphone/tablet/computer.

        The smartphone/tablet/computer is connected to the printer.

        Note

        • If the printer is set to display a confirmation screen in Connection request confirmation of Changing Wireless Direct Setting, when the wireless direct compatible device connects to the printer, a confirmation screen asking for permission to connect is displayed on the printer touch screen.

          Make sure the name on the touch screen is the same as that of your wireless communication device and select Yes.

You can print from your smartphone or tablet by installing Canon PRINT Inkjet/SELPHY. Download it from App Store and Google Play.

Changing Wireless Direct Setting

Change the settings for the Wireless Direct following the procedure below.

  1. Make sure the printer is turned on.

  2. Select (Setup) on HOME screen and then select Device settings.

    Note

    • If User management settings is enabled, the user selection screen is displayed before the HOME screen is displayed.
  3. Select LAN settings.

  4. Select Wireless Direct.

  5. Select a setting item.

    Scroll down if necessary.

    • See settings

      The setting values for using the printer with Wireless Direct are displayed.

    • Change network name (SSID)

      Change the identifier (SSID) for Wireless Direct.

      The identifier (SSID) is the printer's name (device name) displayed on a Wireless Direct compatible device.

      Follow the procedure below to change the identifier (SSID).

      • To set manually

        1. Select the displayed identifier (SSID).

        2. Change using the keyboard that appears.

        3. When you have finished making changes, select OK.

      • To set automatically

        1. Select Auto update.

        2. Select Yes.

          You can check the updated setting.

        Note

        • To show the password, select Show password. To hide the password, select Hide password.

    • Change password

      Change the password for Wireless Direct.

      • To set manually.

        1. Select Change manually.

        2. Select the displayed password.

        3. Enter the new password (10 characters).

          Change using the keyboard that appears.

        4. When you have finished making changes, select OK.

      • To set automatically

        1. Select Auto update.

        2. Select Yes.

          You can check the updated setting.

        Note

        • To show the password, select Show password. To hide the password, select Hide password.

    • Connection request confirmation

      Change the confirmation screen setting when a Wireless Direct compatible device is connecting to the printer.

      If you want the printer to display the screen to inform you a Wireless Direct compatible device is connecting to the printer, select ON.

      Important

      • To prevent an unauthorized access, we recommend you should select the setting to display the confirmation screen.

Note

  • If you change the Wireless Direct setting of the printer, also change the wireless router setting of the device.