skip to main text

Other printer settings

Select this setting item from Device settings in (Setup).

Important

  • The administrator password may be required to change the settings.

  • Date/time settings

    Sets the current date and time.

  • Date display format

    Selects the date display format.

    Note

  • Daylight saving time setting

    Sets daylight saving time (summer time).

    • Start date/time

      Specifies the month/week/date/time of the start of daylight saving time (summer time).

    • End date/time

      Specifies the month/week/date/time of the end of daylight saving time (summer time).

  • Sound control

    Selects the volume.

    • Keypad volume

      Selects the beep volume when pressing the touch screen or the buttons on the operation panel.

    • Alarm volume

      Selects the alarm volume.

  • Power control

    Allows you to turn on/off the printer automatically to save electricity. In addition, you can specify the time and day to turn it on/off.

    • Use auto power control

      Specifies the length of time to turn off the printer automatically when no operation is made or no printing data is sent to the printer. In addition, you can allow the printer to turn on automatically when a scanning command from a computer or printing data is sent to the printer.

    • Use scheduling

      Specifies the time to turn on/off the printer automatically for each day of the week.

    • Do not use power control

      Disables the function to turn on/off the printer automatically.

  • Time zone

    Specifies the time zone according to a country or region you live in.

    Specifying the time zone to the printer allows you to display the correct time an e-mail was sent from the main unit on your mail software.

  • Original removal reminder

    Selects whether the printer will display the reminder screen in case you forget to remove the original from the platen after scanning.

    Important

    • Depending on the type of original or the state of the document cover, forgetting to remove the original may not be detected.

  • Keyboard settings

    Set the keyboard.

    Select Full keyboard to select the keyboard layout from the following three types.

    • QWERTY

    • QWERTZ

    • AZERTY

  • Ink level monitor

    • Reset ink level count

      When adding the ink to the upper limit with the ink remained in the ink tank, reset the ink residual amount count to 100%.

  • Force ink tank selection

    You can specify the ink to use.

    • All ink tanks

      Use both color ink and black ink.

    • Black only

      Use only black ink.

      Note

      • When any of the inks reached the lower limit line, printing is disabled.

  • Fixed print quality

    Specifies print quality when printing on plain paper.

  • Screen lock settings

    Lock the screen to prevent the panel operation by someone other than the administrator.