skip to main text

Updating Printer Firmware

Important

  • Make sure the printer is connected to Internet before updating printer firmware.

  • Do not turn off the printer while the update is in progress.

  • In the printer setup at the start of use, if you set Do you want to update automatically when new firmware is available? to ON, it will be automatically updated even if the administrator mode is enabled after that.

Follow the procedure below.

Updating Printer Firmware from Operation Panel

  1. Check that printer is turned on.

  2. Select (Setup) on HOME screen > Printer settings > Reset settings > Reset all, in order to restore to default administrator password.

    The setup menu screen appears.

    Note

    • If User management settings is enabled, the user selection screen is displayed before the HOME screen is displayed.

  3. Select Printer settings

  4. Select Firmware update.

  5. Select Install update.

  6. Check displayed message and select Yes.

  7. Check displayed message and select Start update.

    Update starts.

    Finishing update turns off the printer and it turns on again.

  8. Check displayed message and select OK.

Updating Printer Firmware from Remote UI

  1. Display printer status on web browser.

  2. Select Firmware update.

  3. Select Install update.

  4. Check displayed message and select Update.

    Update starts and returns to the menu screen when update is completed.