Using On Hook Dial Function
Follow the procedure below to send faxes with the on hook dial function.
Important
-
It may be possible that faxes will reach unintended recipients due to the misdialing or incorrect registration of fax/telephone numbers. When you send important documents, we recommend that you send them after speaking on the telephone.
-
With manual transmission, you cannot use the platen to load documents. Load the documents in the ADF.
When loading document on the platen, send a fax with automatic transmission.
Note
-
You can use the on hook dial function only when Hook key setting in Security control under Fax settings is set to Enable.
-
For details on the basic sending operations:
-
Select Fax on the HOME screen.
The Fax standby screen is displayed.
-
Change send settings as necessary.
-
Select .
-
Specify a recipient.
Specify the recipient with the one of the following methods.
-
By specifying with the recipient registered to the printer:
Select the registered recipient by selecting Directory.
-
By entering the fax/telephone numbers:
Select the entry field of fax/telephone numbers and enter the number.
-
Manual redialing:
Select Redial and select a number in the outgoing call logs.
-
-
When you hear a high-pitched signal, press the Black button or the Color button.
Important
-
Color transmission is available only when the recipient's fax device supports color faxing.
-
Note
-
If documents remain in the ADF after the Stop button is pressed while scanning is in progress, Originals in ADF. Remove any originals from the document tray and tap [OK]. is displayed on the touch screen. By selecting OK, the remaining documents are automatically ejected.