Sending Fax after Speaking on Telephone

If you want to speak to the recipient before sending a fax, or if the recipient does not have a fax device that can receive faxes automatically, send a fax manually after speaking to the recipient on the telephone to check whether the recipient can receive faxes.

Important

• It may be possible that faxes will reach unintended recipients due to the misdialing or incorrect registration of fax/telephone numbers. When you send important documents, we recommend that you send them after speaking on the telephone. See below for the procedure to send a fax manually.

• With manual transmission, you cannot use the platen to load documents. Load the documents in the ADF.

  When loading document on the platen, send a fax with automatic transmission.

  • Sending Faxes by Entering Fax/Telephone Number

• To speak to the recipient before sending a fax, you need to connect a telephone to the printer.

  For details on how to connect the telephone to the printer:

  • Basic Connection (Connecting with General Telephone line)

Note

• For details on the basic sending operations:

  • Sending Faxes by Entering Fax/Telephone Number

1. Check that printer is turned on.

2. Load documents in ADF.

3. Select Fax on the HOME screen.

   • Using Touch Screen

   The Fax standby screen is displayed.

4. Change send settings as necessary.

   • Setting Items for Sending Faxes

5. Lift handset of telephone connected to printer.

6. Use telephone to dial recipient's fax/telephone number.

7. Speak to recipient.

   When you hear a high-pitched signal instead of the recipient's voice, you cannot check whether the recipient can receive faxes. If you want to stop sending the fax, hang up handset. If you want to send the fax, go to step 8.

8. Ask recipient to set recipient's fax device to receive faxes.

9. When you hear a high-pitched signal, press the Black button or the Color button.

   Important

   • Color transmission is available only when the recipient's fax device supports color faxing.

10. Hang up handset.

Note

• If documents remain in the ADF after the Stop button is pressed while scanning is in progress, Originals in ADF. Remove any originals from the document tray and tap [OK]. is displayed on the touch screen. By selecting OK, the remaining documents are automatically ejected.