skip to main text

Admin pwd. settings

The administrator password can be set or canceled.

Important

  • The password of printer is set at the time of purchase.

  • The administrator password may be required to change the settings.

  1. Check that printer is turned on.

  2. Select Settings on the HOME screen.

  3. Select Device settings.

  4. Select Admin pwd. settings.

  5. If the authentication screen for an administrator password is displayed, enter a password, then select OK.

    When the administrator password is not set, the registration confirmation message is displayed. Select Yes. The message is displayed again. Then, select OK and proceed to step 7.

  6. Select Change admin pwd..

    When you do not set the administrator password, select Remove admin pwd.. Select Yes in the displayed screen. The message is displayed again. Then, select OK.

  7. Select the effective range of the administrator password.

    Remote UI and tools
    To change the setting using the remote UI or a certain software, the administrator password needs to be entered.
    LCD, RMT UI, tools
    To change the setting using the operation panel of this printer, remote UI or a certain software, the administrator password needs to be entered.

  8. Enter the administrator password.

    Enter the password using 4 to 32 alphanumeric characters and symbols.

    Important

    • From a security point of view, it is recommended to set the password of 8 characters or more in combination of alphanumeric characters and symbols.

  9. Enter the administrator password again.

    The administrator password is available.