skip to main text

Front View

Image showing the front of the printer
A: Document Cover
Open to load an original on the platen.
B: Platen
Load an original here.
C: ADF Scan Helper
Remove only when cleaning the ADF.
D: Operation Panel

Use to change the settings of the printer or to operate it. The panel is pushed open by the paper output tray before printing starts.

E: Paper Output Tray
Printed paper is ejected. Pull out it before printing.
Image showing the front of the printer
F: Resizing Tab
Use to load legal-size paper into the cassette.
G: Cassette

Loads the paper and feeds it into the printer.

H: Paper Guides
Align with right/left/front sides of the paper stack.
Image showing the front of the printer
I: Ink Tank Covers
Open to refill ink tanks.
J: Upper Limit Line
Indicates the maximum capacity of the ink.
K: Single Dot
Indicates the amount of ink required when replacing ink in print head.
L: Lower Limit Line
Indicates the lower limit of the sufficient amount of ink to print. Refill the ink tank before the amount of ink is below this line.
M: Ink Tanks

The black ink tank is on the left, and the color ink tanks (cyan, magenta, and yellow) are on the right.

If any ink levels are low, refill the low tanks.

N: Tank Caps
Open to refill ink tanks.
Image showing the front of the printer
O: Document Tray
Open to load a document in the ADF. You can load two or more sheets of document of the same size and thickness. Load the document with the side you want to scan facing up.
P: Document Feeder Cover
Open when clearing jammed documents.
Q: ADF (Auto Document Feeder)

Load a document here. The documents loaded in the document tray are scanned automatically one sheet at a time.

R: Document Guide
Adjust this guide to match the width of document in the ADF.
S: Document Output Slot
Documents scanned from the ADF are delivered here.