Stand Parts
![](screens/imghm000276-94.jpg)
- (A) Stand Unit
- A stand that holds the printer. Equipped with casters to facilitate moving the printer.
- (B) Basket
-
Catches the ejected printed documents. (See "Parts of the Basket.")
- (C) Locking Caster
-
A locking caster that, when the lock is in the ON position, immobilizes the printer.
When moving the stand, be sure to set the locking caster lock to the OFF position to release the lock.
If you move it while the locking casters are locked, the floor may become scratched.
- (D) Accessory Pocket
- Store printer manuals, assembly tools, and other items in this pocket.
Parts of the Basket
![](screens/imghm001791-94.jpg)
- (A) Basket Rod (tag side)
- Secures the cloth basket to the tips of the basket arm.
- (B) Basket Arm
-
Retains the basket rod (tag side).
By changing the length and the angle, you can make the basket suitable for various conditions.
- (C) Basket
- A cloth tray that catches ejected documents.
- (D) White Tag
- Marks indicating basket attachment orientation.
- (E) Basket Rewind Button
- Press this button when rewinding the basket after it has been wound on the basket rod (tag side).
- (F) Basket Rod (cord side)
- Secures the cloth basket on the rod holder.
- (G) Rod Holder
- Retains the basket rod (cord side).
For instructions on how to use the basket, see "Using the Basket" and "Example Basket Configurations". When not using the basket, you can lower it and store alongside of the stand. (See "Storing the Basket.")