skip to main text

Printing Network Settings

Use the operation panel to print the printer's current network settings.

Important

  • The network settings printout contains important information about your network. Handle it with care.
  1. Check that printer is turned on.

  2. Load plain paper.

    If you use sheets, prepare at least 10 sheets (A4 or Letter-sized).

  3. Select (Setup) icon on HOME screen.

  4. Select Printer settings.

  5. Select LAN settings.

  6. Select Print details.

  7. Select Yes on displayed screen.

  8. Select Yes or No on displayed screen.

    The printer starts printing network settings information.

Note

  • You can also print the printer's network settings. Select the (Setup) icon > Printer settings > Test print > Print LAN details > Yes > Yes.

The printed network settings information is as follows: (Some setting values are not displayed depending on the printer settings.)

Item

Description

Setting

LAN Setting

Basic setting information

-

Basic Info

IPv4 setting information (Wired LAN)

-

LAN Interface Mode

Current interface

Wired LAN/Wireless LAN(Infra)/Wireless LAN(AP)/Wireless(Wireless direct)/Disabled

Link Active

Operation status

Active/Inactive

IP Address

IPv4 IP address

XXX.XXX.XXX.XXX

Gateway Address

IPv4 default gateway

XXX.XXX.XXX.XXX

Subnet Mask

IPv4 subnet mask

XXX.XXX.XXX.XXX

IP Mode

Acquiring method of IPv4 IP address

Auto IP/DHCP/Manual

Use DNS Auto Mode

Acquiring DNS server automatically

On/Off

Primary DNS Server Address

Primary DNS server address

XXX.XXX.XXX.XXX

Secondary DNS Server Address

Secondary DNS server address

XXX.XXX.XXX.XXX

Control Filtering

SNMP filtering setting information

-

Use IP Filtering

Operation status of IP filtering

On/Off

IP Filtering Select

IP filtering method

Disabled/Enabled

IP Filtering Permission Address

IP filtering permission address

-

Start Address 1

Start address 1

XXX.XXX.XXX.XXX

End Address 1

End address 1

XXX.XXX.XXX.XXX

Use Single On 1

Use single on 1

On/Off

Start Address 2

Start address 2

XXX.XXX.XXX.XXX

End Address 2

End address 2

XXX.XXX.XXX.XXX

Use Single On 2

Use single on 2

On/Off

Start Address 3

Start address 3

XXX.XXX.XXX.XXX

End Address 3

End address 3

XXX.XXX.XXX.XXX

Use Single On 3

Use single on 3

On/Off

Start Address 4

Start address 4

XXX.XXX.XXX.XXX

End Address 4

End address 4

XXX.XXX.XXX.XXX

Use Single On 4

Use single on 4

On/Off

Start Address 5

Start address 5

XXX.XXX.XXX.XXX

End Address 5

End address 5

XXX.XXX.XXX.XXX

Use Single On 5

Use single on 5

On/Off

IP Filtering Prohibit Address

IP filtering prohibit address

-

Start Address 1

Start address 1

XXX.XXX.XXX.XXX

End Address 1

End address 1

XXX.XXX.XXX.XXX

Use Single On 1

Use single on 1

On/Off

Start Address 2

Start address 2

XXX.XXX.XXX.XXX

End Address 2

End address 2

XXX.XXX.XXX.XXX

Use Single On 2

Use single on 2

On/Off

Start Address 3

Start address 3

XXX.XXX.XXX.XXX

End Address 3

End address 3

XXX.XXX.XXX.XXX

Use Single On 3

Use single on 3

On/Off

Start Address 4

Start address 4

XXX.XXX.XXX.XXX

End Address 4

End address 4

XXX.XXX.XXX.XXX

Use Single On 4

Use single on 4

On/Off

LAN Setting

Basic setting information

-

Basic Info

IPv4 setting information (Wired LAN)

-

Control Filtering

SNMP filtering setting information

-

IP Filtering Prohibit Address

IP filtering prohibit address

-

Start Address 5

Start address 5

XXX.XXX.XXX.XXX

End Address 5

End address 5

XXX.XXX.XXX.XXX

Use Single On 5

Use single on 5

On/Off

Print Filtering

Print filtering setting information

-

Use IP Filtering

Operation status of IP filtering

On/Off

IP Filtering Select

IP filtering method

Disabled/Enabled

IP Filtering Permission Address

IP filtering permission address

-

Start Address 1

Start address 1

XXX.XXX.XXX.XXX

End Address 1

End address 1

XXX.XXX.XXX.XXX

Use Single On 1

Use single on 1

On/Off

Start Address 2

Start address 2

XXX.XXX.XXX.XXX

End Address 2

End address 2

XXX.XXX.XXX.XXX

Use Single On 2

Use single on 2

On/Off

Start Address 3

Start address 3

XXX.XXX.XXX.XXX

End Address 3

End address 3

XXX.XXX.XXX.XXX

Use Single On 3

Use single on 3

On/Off

Start Address 4

Start address 4

XXX.XXX.XXX.XXX

End Address 4

End address 4

XXX.XXX.XXX.XXX

Use Single On 4

Use single on 4

On/Off

Start Address 5

Start address 5

XXX.XXX.XXX.XXX

End Address 5

End address 5

XXX.XXX.XXX.XXX

Use Single On 5

Use single on 5

On/Off

IP Filtering Prohibit Address

IP filtering prohibit address

-

Start Address 1

Start address 1

XXX.XXX.XXX.XXX

End Address 1

End address 1

XXX.XXX.XXX.XXX

Use Single On 1

Use single on 1

On/Off

Start Address 2

Start address 2

XXX.XXX.XXX.XXX

End Address 2

End address 2

XXX.XXX.XXX.XXX

Use Single On 2

Use single on 2

On/Off

Start Address 3

Start address 3

XXX.XXX.XXX.XXX

End Address 3

End address 3

XXX.XXX.XXX.XXX

Use Single On 3

Use single on 3

On/Off

Start Address 4

Start address 4

XXX.XXX.XXX.XXX

End Address 4

End address 4

XXX.XXX.XXX.XXX

Use Single On 4

Use single on 4

On/Off

Start Address 5

Start address 5

XXX.XXX.XXX.XXX

End Address 5

End address 5

XXX.XXX.XXX.XXX

Use Single On 5

Use single on 5

On/Off

LAN Setting

Basic setting information

-

IPv6 Info

IPv6 setting information (Wired LAN)

-

Link Local Address

Link local address

-

IP Address

IPv6 IP address

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

Prefix Length

Link local address prefix length

XXX (0 to 128)

Use Manual Mode

Operation status of IPv6 manual address

On/Off

Manual Address

Manual address

-

IP Address

IPv6 IP address

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

Prefix Length

Prefix length

XXX (0 to 128)

Use Stateful Address Mode

Operation status of stateful address mode

On/Off

Stateful Address

Stateful address

-

IP Address

IPv6 IP address

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

Prefix Length

Prefix length

XXX (0 to 128)

Stateless Address

Stateless address

-

IP Address 1

IP address 1

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

Prefix Length 1

Prefix length 1

XXX (0 to 128)

IP Address 2

IP address 2

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

Prefix Length 2

Prefix length 2

XXX (0 to 128)

IP Address 3

IP address 3

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

Prefix Length 3

Prefix length 3

XXX (0 to 128)

IP Address 4

IP address 4

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

Prefix Length 4

Prefix length 4

XXX (0 to 128)

Gateway Address

Gateway address

-

IP Address 1

IP address 1

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

Prefix Length 1

Prefix length 1

XXX (0 to 128)

IP Address 2

IP address 2

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

Prefix Length 2

Prefix length 2

XXX (0 to 128)

IP Address 3

IP address 3

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

Prefix Length 3

Prefix length 3

XXX (0 to 128)

IP Address 4

IP address 4

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

Prefix Length 4

Prefix length 4

XXX (0 to 128)

Use DNS Auto Mode

Acquiring DNS server automatically

On/Off

Primary DNS Server Address

Primary DNS server address

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

Secondary DNS Server Address

Secondary DNS server address

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

Control Filtering

SNMP filtering setting information

-

Use IP Filtering

Operation status of IP filtering

On/Off

IP Filtering Select

IP filtering method

Disabled/Enabled

IPv6 Filtering Permission Info

IPv6 filtering permission information

-

IP Filtering Start Address 1

IP filtering start address 1

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

IP Filtering End Address 1

IP filtering end address 1

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

Use Single On 1

Use single on 1

On/Off

LAN Setting

Basic setting information

-

IPv6 Info

IPv6 setting information (Wired LAN)

-

Control Filtering

SNMP filtering setting information

-

IP Filtering Start Address 2

IP filtering start address 2

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

IP Filtering End Address 2

IP filtering end address 2

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

Use Single On 2

Use single on 2

On/Off

IP Filtering Start Address 3

IP filtering start address 3

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

IP Filtering End Address 3

IP filtering end address 3

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

Use Single On 3

Use single on 3

On/Off

IP Filtering Start Address 4

IP filtering start address 4

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

IP Filtering End Address 4

IP filtering end address 4

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

Use Single On 4

Use single on 4

On/Off

IP Filtering Start Address 5

IP filtering start address 5

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

IP Filtering End Address 5

IP filtering end address 5

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

Use Single On 5

Use single on 5

On/Off

IPv6 Filtering Prohibit Info

IPv6 Filtering prohibit information

-

IP Filtering Start Address 1

IP filtering start address 1

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

IP Filtering End Address 1

IP filtering end address 1

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

Use Single On 1

Use single on 1

On/Off

IP Filtering Start Address 2

IP filtering start address 2

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

IP Filtering End Address 2

IP filtering end address 2

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

Use Single On 2

Use single on 2

On/Off

IP Filtering Start Address 3

IP filtering start address 3

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

IP Filtering End Address 3

IP filtering end address 3

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

Use Single On 3

Use single on 3

On/Off

IP Filtering Start Address 4

IP filtering start address 4

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

IP Filtering End Address 4

IP filtering end address 4

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

Use Single On 4

Use single on 4

On/Off

IP Filtering Start Address 5

IP filtering start address 5

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

IP Filtering End Address 5

IP filtering end address 5

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

Use Single On 5

Use single on 5

On/Off

Print Filtering

Print filtering setting information

-

Use IP Filtering

Operation status of IP filtering

On/Off

IP Filtering Select

IP filtering method

Disabled/Enabled

IP Filtering Permission Info

IP filtering permission information

-

IP Filtering Start Address 1

IP filtering start address 1

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

IP Filtering End Address 1

IP filtering end address 1

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

Use Single On 1

Use single on 1

On/Off

IP Filtering Start Address 2

IP filtering start address 2

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

IP Filtering End Address 2

IP filtering end address 2

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

Use Single On 2

Use single on 2

On/Off

LAN Setting

Basic setting information

-

IPv6 Info

IPv6 setting information (Wired LAN)

-

Print Filtering

Print filtering setting information

-

IP Filtering Start Address 3

IP filtering start address 3

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

IP Filtering End Address 3

IP filtering end address 3

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

Use Single On 3

Use single on 3

On/Off

IP Filtering Start Address 4

IP filtering start address 4

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

IP Filtering End Address 4

IP filtering end address 4

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

Use Single On 4

Use single on 4

On/Off

IP Filtering Start Address 5

IP filtering start address 5

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

IP Filtering End Address 5

IP filtering end address 5

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

Use Single On 5

Use single on 5

On/Off

IPv6 Filtering Prohibit Info

IPv6 Filtering prohibit information

-

IP Filtering Start Address 1

IP filtering start address 1

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

IP Filtering End Address 1

IP filtering end address 1

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

Use Single On 1

Use single on 1

On/Off

IP Filtering Start Address 2

IP filtering start address 2

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

IP Filtering End Address 2

IP filtering end address 2

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

Use Single On 2

Use single on 2

On/Off

IP Filtering Start Address 3

IP filtering start address 3

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

IP Filtering End Address 3

IP filtering end address 3

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

Use Single On 3

Use single on 3

On/Off

IP Filtering Start Address 4

IP filtering start address 4

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

IP Filtering End Address 4

IP filtering end address 4

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

Use Single On 4

Use single on 4

On/Off

IP Filtering Start Address 5

IP filtering start address 5

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

IP Filtering End Address 5

IP filtering end address 5

XXXX:XXXX:XXXX:XXXX

XXXX:XXXX:XXXX:XXXX

Use Single On 5

Use single on 5

On/Off

MAC Info

MAC address setting information (Wired/Wi-Fi)

-

MAC Address(Wired)

MAC address (Wired LAN)

XX:XX:XX:XX:XX:XX

MAC Address(Wireless)

MAC address (Wi-Fi)

XX:XX:XX:XX:XX:XX

Use MAC Address Filtering

Operation status of MAC address filtering

On/Off

MAC Filtering Select

MAC address filtering method

Disabled/Enabled

MAC Filtering Permission Info

MAC filtering permission information

-

MAC Address 1

MAC address 1

XX:XX:XX:XX:XX:XX

MAC Address 2

MAC address 2

XX:XX:XX:XX:XX:XX

MAC Address 3

MAC address 3

XX:XX:XX:XX:XX:XX

MAC Address 4

MAC address 4

XX:XX:XX:XX:XX:XX

MAC Address 5

MAC address 5

XX:XX:XX:XX:XX:XX

LAN Setting

Basic setting information

-

MAC Info

MAC address setting information (Wired/Wi-Fi)

-

MAC Filtering Prohibit Info

MAC filtering prohibit information

-

MAC Address 1

MAC address 1

XX:XX:XX:XX:XX:XX

MAC Address 2

MAC address 2

XX:XX:XX:XX:XX:XX

MAC Address 3

MAC address 3

XX:XX:XX:XX:XX:XX

MAC Address 4

MAC address 4

XX:XX:XX:XX:XX:XX

MAC Address 5

MAC address 5

XX:XX:XX:XX:XX:XX

Proxy Setting

Proxy server setting information

-

Use Proxy

Use proxy server

On/Off

Proxy Server Address

Proxy server address

XXXXXXXXXXXXXXXX (up to 128 characters)

Proxy Port Number

Proxy port specification

1 to 65535

Use User Authority Mode

Use user authority mode

On/Off

Proxy Server User Name

Proxy server user name

XXXXXXXXXXXXXXXX (up to 64 characters)

Wireless LAN Setting

Wi-Fi setting information

-

Channel

Channel (infrastructure)

XXX (0 to 255)

SSID

SSID

Wi-Fi (infrastructure) SSID (up to 32 characters)

Security Type

Security type for Wi-Fi (infrastructure)

Disabled/WEP 64bit/WEP 128bit/WPA PSK TKIP/WPA PSK AES/WPA2 PSK TKIP/WPA2 PSK AES/MIXED

WEP1

WEP key 1 for Wi-Fi (infrastructure)

XXXXXXXX (up to 32 characters)

WEP2

WEP key 2 for Wi-Fi (infrastructure)

XXXXXXXX (up to 32 characters)

WEP3

WEP key 3 for Wi-Fi (infrastructure)

XXXXXXXX (up to 32 characters)

WEP4

WEP key 4 for Wi-Fi (infrastructure)

XXXXXXXX (up to 32 characters)

WEP Certificate

WEP certificate for Wi-Fi (infrastructure)

Open/Shared/Auto

WEP Format

WEP format for Wi-Fi (infrastructure)

Hex/String

Direct Connection Setting

Wireless direct setting information

-

Device Name

Wireless direct device name

Wireless direct device name (up to 32 characters)

Channel

Channel (Wireless direct)

XXX (0 to 255)

SSID

SSID

Wireless direct network name (SSID) device name (up to 32 characters)

Security Type

Security type for Wi-Fi (Wireless direct)

Disabled/WPA2 PSK TKIP/WPA2 PSK AES

WSD Setting

WSD setting information

-

Use WSD

Use WSD

On/Off

WSD Timeout

Timeout

1/5/10/15/20 [min]

Use WSD Rx Optimization

Use WSD reception optimization

On/Off

Protocol Setting

Protocol setting information

-

Printer Name

Printer name

XXXXXXXX (up to 16 characters)

Use LPR

Use LPR

On/Off

Use Wired DRX

Discontinuous reception (Wired LAN)

On/Off

Use Wireless DRX

Discontinuous reception (Wi-Fi)

On/Off

Use RAW

Use RAW

On/Off

Use LLMNR

Use LLMNR

On/Off

Use Spanning Tree

Use spanning tree

On/Off

Use Dedicated Port

Dedicated port setting

On/Off

SNMP Setting

SNMP setting information

-

Use SNMPv1

Use SNMPv1

On/Off

Use SNMPv3

Use SNMPv3

On/Off

SNMP Community Name1

SNMPv1 community name 1

XXXXXXXX (up to 32 characters)

SNMP Community Name2

SNMPv1 community name 2

XXXXXXXX (up to 32 characters)

SNMP Extra Access Authority

SNMPv1 extra access authority

Disable/Read Only/Read Write

SNMP Access Authority1

SNMPv1 community1/2 access authority

Read Only/Read Write

SNMP Access Authority2

SNMPv1 community1/2 access authority

Disable/Read Only/Read Write

SNMPv3 Setting

SNMPv3 setting information

-

User1

User 1

-

User Name

User name

XXXXXXXX (up to 32 characters)

Use SNMPv3

Use SNMPv3

On/Off

MIB Access Restriction

MIB access restriction

Read Only/Read Write

Security Setting

Security setting

No Auth No Priv/Auth No Priv/Auto Priv

Authority Algorithm

Authority algorithm

Null/MD5/SHA1

Encryption Algorithm

Encryption algorithm

Null/AES/DES

User2

User 2

-

User Name

User name

XXXXXXXX (up to 32 characters)

Use SNMPv3

Use SNMPv3

On/Off

MIB Access Restriction

MIB access restriction

Read Only/Read Write

Security Setting

Security setting

No Auth No Priv/Auth No Priv/Auto Priv

Authority Algorithm

Authority algorithm

Null/MD5/SHA1

Encryption Algorithm

Encryption algorithm

Null/AES/DES

User3

User 3

-

User Name

User name

XXXXXXXX (up to 32 characters)

Use SNMPv3

Use SNMPv3

On/Off

MIB Access Restriction

MIB access restriction

Read Only/Read Write

Security Setting

Security setting

No Auth No Priv/Auth No Priv/Auto Priv

Authority Algorithm

Authority algorithm

Null/MD5/SHA1

Encryption Algorithm

Encryption algorithm

Null/AES/DES

User4

User 4

-

User Name

User name

XXXXXXXX (up to 32 characters)

Use SNMPv3

Use SNMPv3

On/Off

MIB Access Restriction

MIB access restriction

Read Only/Read Write

Security Setting

Security setting

No Auth No Priv/Auth No Priv/Auto Priv

Authority Algorithm

Authority algorithm

Null/MD5/SHA1

Encryption Algorithm

Encryption algorithm

Null/AES/DES

User5

User 5

-

User Name

User name

XXXXXXXX (up to 32 characters)

Use SNMPv3

Use SNMPv3

On/Off

MIB Access Restriction

MIB access restriction

Read Only/Read Write

Security Setting

Security setting

No Auth No Priv/Auth No Priv/Auto Priv

Authority Algorithm

Authority algorithm

Null/MD5/SHA1

Encryption Algorithm

Encryption algorithm

Null/AES/DES

Dynamic DNS Setting

Dynamic DNS setting

-

IPv4

IPv4

-

Use Dynamic DNS

Operation status of Dynamic DNS

On/Off

Host Name

Host name

XXXXXXXX (up to 64 characters)

Domain Name

Domain name

XXXXXXXX (up to 65 characters)

IPv6

IPv6

-

Use Manual Address

DNS dynamic setting of manual address

On/Off

Use Stateless Address

DNS dynamic setting of stateless address

On/Off

Use Stateful Address

DNS dynamic setting of stateful address

On/Off

Use Name As IPv4

Use same host name/domain name as that used for IPv4

On/Off

Host Name

Host name

XXXXXXXX (up to 64 characters)

Domain Name

Domain name

XXXXXXXX (up to 65 characters)

SNTP Setting

SNTP setting information

-

Use SNTP

Use SNTP

On/Off

SNTP Polling Interval

SNTP polling interval

1 to 48 [sec]

SNTP Server Name

SNTP server name

XXXXXXXX (up to 256 characters)

FTP Setting

FTP setting information

-

Use FTP

Use FTP

On/Off

Use FTP Authority

Use FTP authority

On/Off

FTP User Name

FTP user name

XXXXXXXX (up to 33 characters)

Bonjour Setting

Bonjour setting information

-

Use Bonjour

Use Bonjour

On/Off

Bonjour Service Name

Bonjour service name

Bonjour service name (Up to 50 alphanumeric characters)

802.1X Setting

802.1X setting information

-

Authority Type

Enable/disable 802.1X and authority type

Do not use/EAP-TLS/EAP-TTLS/PEAP

EAP TTLS Type

Internal authority type for EAP-TTLS

MSCHAPv2/PAP

Weak Encryption Restriction

Weak encryption restriction

Do not restrict/Restrict

Weak Certificate Restriction

Weak certificate restriction

Do not restrict/Restrict

Login Name

Login name

XXXXXXXX (up to 24 characters)

User Name

User name

XXXXXXXX (up to 24 characters)

Server Name

Server name

XXXXXXXX (up to 43 characters)

IPsec Setting

IPsec setting information

-

Use IPsec

Use IPsec

On/Off

Previous Shared Key

Previous shared key for IPsec

XXXXXXXX (up to 17 characters)

Phase2 Protocol

IPsec phase2 protocol

AH/ESP/AH+ESP

IPP Setting

IPP confirmation setting

-

Use IPP

Use IPP

On/Off

Use IPP Authority

Use IPP authority

On/Off

IPP User Setting

IPP confirmation user setting

-

User1

User 1

-

User Name

User name

XXXXXXXX (up to 32 characters)

User2

User 2

-

User Name

User name

XXXXXXXX (up to 32 characters)

User3

User 3

-

User Name

User name

XXXXXXXX (up to 32 characters)

User4

User 4

-

User Name

User name

XXXXXXXX (up to 32 characters)

User5

User 5

-

User Name

User name

XXXXXXXX (up to 32 characters)

User6

User 6

-

User Name

User name

XXXXXXXX (up to 32 characters)

User7

User 7

-

User Name

User name

XXXXXXXX (up to 32 characters)

User8

User 8

-

User Name

User name

XXXXXXXX (up to 32 characters)

User9

User 9

-

User Name

User name

XXXXXXXX (up to 32 characters)

User10

User 10

-

User Name

User name

XXXXXXXX (up to 32 characters)

Email Setting

E-mail setting information

-

Retry Count

E-mail retry count

0 to 5

Retry Interval

E-mail retry interval

1 to 60 (min)

Use Email Notification

Use E-mail notification

On/Off

Use SSL

Use SSL

On/Off

Use SSL Cert No Check

Use SSL certification

On/Off

Use Mailbox Delete

Use mailbox delete

On/Off

SMTP Server Address

SMTP server address

XXXXXXXX (up to 256 characters)

SMTP Server Port No

SMTP server port number

1 to 65535

SMTP State

SMTP state

Invalid/Authorized/POP before SMTP

From Address

From address

XXXXXXXX (up to 128 characters)

To Address 1

To address 1

XXXXXXXX (up to 128 characters)

Reply Address 1

Reply address 1

XXXXXXXX (up to 128 characters)

Notice Conditions 1

Notice conditions 1

-

Job End

Job end

On/Off

Error Occurred

Error occurred

On/Off

Warning Occurred

Warning occurred

On/Off

Signature 1

Signature 1

XXXXXXXX (up to 128 characters)

To Address 2

To address 2

XXXXXXXX (up to 128 characters)

Reply Address 2

Reply address 2

XXXXXXXX (up to 128 characters)

Notice Conditions 2

Notice conditions 2

-

Job End

Job end

On/Off

Error Occurred

Error occurred

On/Off

Warning Occurred

Warning occurred

On/Off

Signature 2

Signature 2

XXXXXXXX (up to 128 characters)

RUI Setting

Remote UI setting information

-

Use RUI

Use Remote UI

On/Off

("XX" represents alphanumeric characters.)