Front View
- (1) ADF (Auto Document Feeder)
-
Load a document here. The documents loaded in the document tray are scanned automatically one sheet at a time.
- (2) operation panel
-
Use to change the settings of the printer or to operate it.
- (3) document feeder cover
- Open when clearing jammed documents.
- (4) document guide
- Adjust this guide to match the width of document in the ADF.
- (5) paper support extension
- Open to load paper in the rear tray.
- (6) paper support
- Open to load paper in the rear tray.
- (7) rear tray
-
Load paper here. Two or more sheets of the same size and type of paper can be loaded at the same time, and fed automatically one sheet at a time.
- (8) paper guides
- Align with both sides of the paper stack.
- (9) document tray
- Open to load a document in the ADF. You can load two or more sheets of document of the same size and thickness. Load the document with the side you want to scan facing up.
- (10) document output slot
- Documents scanned from the ADF are delivered here.
- (11) document cover
- Open to load an original on the platen glass.
- (12) paper output tray
- Printed paper is ejected. Open before printing.
- (13) output tray extension
- Open to support ejected paper.
- (14) POWER lamp
- Lights after flashing when the power is turned on.
- (15) FAX Memory lamp
-
Lights or flashes depending on the document stored in the printer's memory.
- Lights:
- Printed received document or unsent document is stored in the printer's memory.
- Flashes
- Unprinted received document is stored in the printer's memory.
- (16) Alarm lamp
- Lights or flashes when an error occurs.
- (17) ON button
-
Turns the power on or off. Before turning on the power, make sure that the document cover is closed.
- (18) platen glass
- Load an original here.
