Updating Printer Firmware

Important

Make sure the printer is connected to Internet before updating printer firmware.
Do not turn off the printer while the update is in progress.

Follow the procedure below.

Updating Printer Firmware from Operation Panel

Check that printer is turned on.
- Checking that Power Is On
Select Settings on HOME screen and press OK button.
- LCD and Operation Panel
Select Device settings and press OK button.
Select Firmware update and press OK button.
Select Install update and press OK button.
Check displayed message, select Next and press OK button.
Check displayed message, select Yes and press OK button.
Check displayed message, select Start update and then press OK button.

Update starts.

Finishing update turns off the printer and it turns on again.
Check displayed message and press OK button.

Display printer status on web browser.
- Configuration Changes / Display Printer Status Using Web Browser
Select Firmware update.
Select Install update.
Check displayed message and select Update.

Update starts and returns to the menu screen when update is completed.