skip to main text

Connecting with Wireless Direct

You can connect devices (e.g. computer, smartphone, or tablet) to the printer by two methods below.

  • Wireless connection (connecting devices via a wireless router)

  • Direct wireless connection (connecting devices directly without a wireless router)

This section describes Wireless Direct, which allows you to print by connecting the devices to the printer directly.

Follow the procedure below to set up and use Wireless Direct.

  1. Preparing the printer.

  2. Preparing a device to connect to the printer.

Important

  • You can connect up to 5 devices to the printer at the same time with Wireless Direct.

  • Check the usage restrictions and switch the printer to the Wireless Direct.

Changing Printer Setting to Use Wireless Direct

  1. Make sure the printer is turned on.

  2. Press Setup button.

    The Setup menu screen appears.

  3. Select Device settings and press the OK button.

  4. Select LAN settings and press the OK button.

  5. Select Wireless Direct and press the OK button.

  6. Select Switch WL Direct and press the OK button.

  7. Check displayed message, select Yes and press the OK button.

  8. Select Done and press the OK button.

    The Wireless Direct is enabled and a device can be connected to the printer wirelessly.

    Note

    • After completing the settings, you can check the Network name(SSID), Security protocol, and WL Direct net.(SSID) by displaying them.

    • When displaying the Security protocol, a screen appears asking whether to display the password at the same time. To display the password, select Yes. To not display the password, select No.

    • The password is required when connecting a device to the printer. Depending on the device you are using, no password is required.

    • When you connect a Wi-Fi Direct compatible device to the printer, select the printer name from your device.

    • To change the identifier (SSID) and the password, see below.

Connecting a smartphone/tablet/computer to the printer

  1. Enable Wi-Fi function on smartphone/tablet/computer.

    Enable Wi-Fi in the Settings menu on your smartphone/tablet/computer.

    For instructions on enabling the Wi-Fi function, refer to the instruction manual for your smartphone/tablet/computer.

  2. Select "DIRECT-XXXX-G3060series" ("X" represents alphanumeric characters) from list on your smartphone/tablet/computer.

    Note

  3. Enter Password on smartphone/tablet/computer.

    The smartphone/tablet/computer is connected to the printer.

    Note

    • Check the password for the Wireless Direct.

      Check by one of the following methods.

    • Depending on the device you are using, entering the password is required to connect a device to the printer via Wi-Fi. Enter the password specified for the printer.

    • If the printer is set to display a confirmation screen in Confirm request of Changing Wireless Direct Setting, when the wireless direct compatible device connects to the printer, a confirmation screen asking for permission to connect is displayed on the printer LCD.

      Make sure the name on the LCD is the same as that of your wireless communication device and select Yes.

You can print from your smartphone or tablet by installing Canon PRINT Inkjet/SELPHY. Download it from App Store and Google Play.

Changing Wireless Direct Setting

Change the settings for the Wireless Direct following the procedure below.

  1. Make sure the printer is turned on.

  2. Press Setup button.

    The Setup menu screen appears.

  3. Select Device settings and press the OK button.

  4. Select LAN settings and press the OK button.

  5. Select Wireless Direct and press the OK button.

  6. Select a setting item.

    Scroll down if necessary.

    • Change name (SSID)

      Change the identifier (SSID) for Wireless Direct.

      The identifier (SSID) is the printer's name (device name) displayed on a Wi-Fi Direct compatible device.

      Follow the procedure below to change the identifier (SSID).

      • To set manually

        1. Select Manual setup and press the OK button.

        2. Press the OK button to enter / edit.

          Press LEFTRIGHT button to enter the identifier (SSID) value one column at a time and press OK button.

          Press the Setup button to change the type of characters to enter (uppercase / lowercase, numbers, symbols).

          One character can be erased by pressing the Back button.

        3. Confirm the input contents and press and hold OK button.

        4. Check displayed message, select Yes and press the OK button.

        5. Check displayed message and press the OK button.

      • To set automatically

        1. Select Auto update and press OK button.

        2. Select Yes and press OK button.

          3. Note

          • After completing the settings, you can check the Network name(SSID), Security protocol, and WL Direct net.(SSID) by displaying them.

          • When displaying the Security protocol, a screen appears asking whether to display the password at the same time. To display the password, select Yes. To not display the password, select No.

    • Change password

      Change the password for Wireless Direct.

      • To set manually.

        1. Select Manual setup and press the OK button.

        2. Enter the new password (10 characters).

          Press LEFTRIGHT button to enter the password value one column at a time and press OK button.

          Press the Setup button to change the type of characters to enter (uppercase / lowercase, numbers, symbols).

          One character can be erased by pressing the Back button.

        3. Confirm the input contents and press and hold OK button.

        4. Check displayed message, select Yes and press the OK button.

      • To set automatically

        1. Select Auto update and press OK button.

        2. Select Yes and press OK button.

          3. Note

          • After completing the settings, you can check the Network name(SSID), Security protocol, and WL Direct net.(SSID) by displaying them.

          • When displaying the Security protocol, a screen appears asking whether to display the password at the same time. To display the password, select Yes. To not display the password, select No.

    • Confirm request

      Change the confirmation screen setting when a Wi-Fi Direct compatible device is connecting to the printer.

      If you want the printer to display the screen to inform you a Wi-Fi Direct compatible device is connecting to the printer, select Yes and press the OK button.

      Important

      • To prevent an unauthorized access, we recommend you should select the setting to display the confirmation screen.

Note

  • If you change the Wireless Direct setting of the printer, also change the wireless router setting of the device.